This document is the user manual for the FP72E S/FP92E S LCD color monitor, which provides instructions on how to use the monitor, install the hardware, and adjust the screen resolution and refresh rate.
This manual covers safety precautions, cleaning, and maintenance for the BenQ FP72E S/FP92E S LCD color displays. It explains how to unpack the product, protect the screen during transport, and safely clean the panel using a non‑abrasive cloth.
The guide walks you through hardware installation, connecting video (DVI‑D or D‑Sub) and audio cables, adjusting screen resolution, refresh rate, and other OSD settings, as well as troubleshooting common issues. Technical specifications such as display size, resolution, contrast, response time, power consumption, and environmental limits are listed at the end of the document. This manual is written in Chinese.
| Display size | 19.0" active TFT |
|---|---|
| Resolution | 1280 x 1024 |
| Typical contrast ratio | 800:1 |
| Minimum contrast ratio | 500:1 |
| Typical brightness | 300 cd/m² |
| Minimum brightness | 240 cd/m² |
| Maximum response time | 8 ms (Ton + Toff) |
| Typical viewing angle | 160/160 (CR>10) |
| Minimum viewing angle | 140/140 (CR>10) |
| Maximum power consumption | 50 W |
| Standby power consumption | <1 W |
| Input signal (analog) | PC RGB 0.7 Vpp / 75 Ω |
| Input signal (digital) | DVI‑D (optional) |
| Speakers | 1 W × 2 |
| Operating humidity | 10 % – 90 % |
Unplug the display from the wall outlet, then clean the LCD surface with a non‑abrasive cloth; do not use liquids, wetting agents, or glass cleaners.
No. Do not use both DVI‑D and D‑Sub cables on a single PC; only one type should be connected at a time.
The display’s maximum power consumption is 50 W.
The display operates between 0 °C and 40 °C with relative humidity from 10 % to 90 %.