CLRWTR GT Series Error **20FF: Token error

Water purifier · taken from the manufacturer’s manual, pages cited

Error code**20FF

Token error occurs when a GT is unresponsive to the token, or there's an unconnected/faulty GT; if persistent after power-on, check timing differences and wiring. The manual's first action is: “When the error code is indicated for a certain period of time after the power supply turned on.: 1. The timings for turning on multiple GT units are different. Arrange the wiring that enables the power supplies to be simultaneously turned on. 2. The screen displays for all GT units have not completed. The error code disappears when the screen displays for all GT units have completed. 3. The settings for the startup screen display vary. Make the same setting for all the connected GT units.”

Model
CLRWTR GT Series
Display shows
Token error (**20FF)
Type
Error code
Source
Manual p. 120

What **20FF means

Token error p. 120

Common causes

  • There is a GT unresponsive to the token. p. 120
  • When the error code is always indicated: 1. There is an unconnected or faulty GT. Check if there is a GT indicating [**20FF]. Reconnect the GT, or turn off the bit in the connected GT designation area. 2. The communication parameters are not specified correctly. Check the baud rate and transmission format for the GT. 3. The same station number is used for more than one GT units. Check the station number setting of the connected GT units. 4. Another GT is reading a SD card. The indication disappears when reading the SD card has completed. p. 120

What to do

  1. When the error code is indicated for a certain period of time after the power supply turned on.: 1. The timings for turning on multiple GT units are different. Arrange the wiring that enables the power supplies to be simultaneously turned on. 2. The screen displays for all GT units have not completed. The error code disappears when the screen displays for all GT units have completed. 3. The settings for the startup screen display vary. Make the same setting for all the connected GT units. p. 120

Before you service the product, read the safety instructions in the manual p. 2.

If **20FF is still not resolved

  • contact service / dealer p. 2
    “Do NOT USE THE PROGRAMMABLE DISPLAY TO CONTROL SAFETY FEATURES OR OTHER CRITICAL OPERATIONS OF EQUIPMENT OR SYSTEMS.”
  • contact service / dealer p. 2
    “A COMMUNICATION ERROR (FOR ANY REASON) MIGHT PREVENT SUCH SAFETY FEATURES OR CRITICAL OPERATIONS FROM FUNCTIONING PROPERLY.”

This page summarises what the manufacturer’s manual says about **20FF; each statement links to the page it comes from, and quoted lines are copied word for word. It is not a substitute for the manual or for a qualified installer. ManualLib is not affiliated with CLRWTR. Found a mistake? Report an error.