Time up error or response error occurs if there’s no reply from PLC, possibly due to cable disconnection or noise interference. The manual's first action is: “1) PLC connection cable is disconnected. Check the wiring of the connection cable and check for disconnection. 2) It is a temporary error caused by noise, etc. Turn on the power supplies for PLC or GT again.”
- Model
- CLRWTR GT Series
- Display shows
- **0001
- Type
- Error code
- Source
- Manual p. 125
What **0001 means
Time up error There is no response from the PLC. p. 125
Common causes
- Time up error There is no response from the PLC. p. 125
- Response error There is an abnormal response returned from the external device. p. 125
What to do
- 1) PLC connection cable is disconnected. Check the wiring of the connection cable and check for disconnection. 2) It is a temporary error caused by noise, etc. Turn on the power supplies for PLC or GT again. p. 125
- Check the data to be returned from the external device. p. 125
Before you service the product, read the safety instructions in the manual p. 2.
If **0001 is still not resolved
- contact service / dealer p. 2 “Do NOT USE THE PROGRAMMABLE DISPLAY TO CONTROL SAFETY FEATURES OR OTHER CRITICAL OPERATIONS OF EQUIPMENT OR SYSTEMS.”
- contact service / dealer p. 2 “A COMMUNICATION ERROR (FOR ANY REASON) MIGHT PREVENT SUCH SAFETY FEATURES OR CRITICAL OPERATIONS FROM FUNCTIONING PROPERLY.”
This page summarises what the manufacturer’s manual says about **0001; each statement links to the page it comes from, and quoted lines are copied word for word. It is not a substitute for the manual or for a qualified installer. ManualLib is not affiliated with CLRWTR. Found a mistake? Report an error.
