Industrial

Extech EX623 True RMS Clamp Meter with IR Thermometer is a 400 Amp True RMS AC/DC Clamp Meter

The QVE00033 phototransistor optical interrupter switch consists of an infrared LED emitter and a phototransistor detector optically coupled through a 0.4mm aperture on both sides. It is designed to indicate the presence or absence of a vane or shield in the emitter to detector path.

This document describes the methods and requirements for interfacing with MM74HC high-speed CMOS logic. The MM74HC series logic can be interfaced with other logic families, including 74LS TTL, MM74C, CD4000 CMOS, and 10000 ECL logic. Interfacing with TTL logic is very simple.

This application note introduces Fairchild Semiconductor's Bushold technology

This document describes the features and characteristics of Fairchild Semiconductor's products, including current ranges of ±75mA and ±500mA.

This application note introduces the bus hold function, which is a new technology for solving floating input problems. The bus hold circuit is able to hold the valid logic of open inputs, and so no external resistors are required to prevent floating or open inputs. The bus hold circuit can mitigate the constraints of floating input conditions. When using non-bus hold devices, these floating input conditions may cause current leakage, oscillation, and data errors. Another feature of the bus hold circuit is the ability to maintain the valid logic state of a 3-state data bus. Therefore, through this data bus, bus hold devices can control the inputs of other devices on the bus.

The FODM8061 is a high-speed optocoupler in S05 miniature flatpack with high isolation voltage capability, its optical input is a AlGaAs LED coupled to a bipolar integrated logic-compatible high-speed receiver. The open-collector, Schottky clamped transistor of the optocoupler ensures its output is compatible with a wide range of logic families, and its key AC and DC characteristics are guaranteed over the -40°C to +110°C operating temperature range.

IR400 Infrared Thermometer is a non-contact infrared thermometer that can measure temperature at the touch of a button. The built-in laser pointer increases target accuracy while the backlit LCD and handy push-buttons combine for convenient, ergonomic operation.

This manual describes the operation of the Extech IR100 Pocket Infrared Thermometer. This device allows the user to take non-contact temperature measurements simply by pointing the meter and pressing a button. This meter is shipped fully tested and calibrated and with proper use will provide years of reliable service.

This document describes the features and characteristics of the Mini IR Thermometer produced by Extech Instruments Corporation. The product has a wide temperature range, is economical and convenient, has automatic data hold, max hold or min hold, and continuous scanning lock feature.

Extech EZ20 EzFlex™ Infrared Thermometer is a non-contact infrared thermometer with a measurement range of -58 to 1100°F (-50 to 600°C) that can measure the surface temperature of objects that are difficult to reach or unsafe to contact.

This document describes the features and characteristics of the Model 42570 Dual Laser InfraRed (IR) Thermometer, including non-contact temperature measurement, measurement range up to 3992°F/2200°C, dual laser convergence, USB interface and software, fast response time, etc.