Industrial

This document is the operation and maintenance manual for EMS4000 and EMS4500 generators, providing instructions on how to operate and maintain these generators. The generators are manufactured by Honda Motor Co., Ltd. and are designed to provide safe and dependable service.

1502B-1510UFB series AC voltage multipliers have an input voltage of 200V-1000V, an output voltage of 200V-1000V, an output current of 22.0A-25.0A, and a recovery time of 70ns-3000ns.

1502B-1510UFB is a single phase bridge rectifier produced by Voltage Multipliers Inc. The rated voltage is 200V-1000V, the rated current is 22.0A-25.0A, and the rated recovery time is 70ns-3000ns.

1509/1509J MECHANICALLY VARIABLE DELAY LINE (SERIES 1509 & 1509J) is a mechanically variable, passive delay line from data delay devices, inc. It features multi-turn adjustment screw, ideal for “Set and Forget” applications, stackable design, 14-pin DIP socket, 20mil x 10mil flat leads, #20 gauge leads, resolution as low as 0.15ns, dielectric breakdown of 50 Vdc, and temperature coefficient of 200 PPM/°C.

1503/1503J series mechanically variable delay lines are passive delay lines produced by data delay devices, inc., with multiple characteristics, including adjustability, stackability, and high precision.

This handbook provides data sheet specifications for the Cyclone® FPGA family, including information on internal architecture, configuration and JTAG boundary-scan testing, DC operating conditions, AC timing parameters, power consumption, and ordering information.

The CycloneTM field programmable gate array family is based on a 1.5-V, 0.13-µm, all-layer copper SRAM process, with densities up to 20,060 logic elements (LEs) and up to 288 Kbits of RAM. It features PLLs for clocking and a dedicated DDR interface for memory requirements. Cyclone devices are cost-effective for data-path applications and support various I/O standards including LVDS and PCI. Low-cost serial configuration devices are available for configuring Cyclone devices.

The U2896B is a modulation PLL for GSM, DCS, and PCS systems. It is realized using TEMIC's advanced silicon bipolar UHF5S technology and integrates a mixer, an I/Q modulator, a phase-frequency detector (PFD) with two synchronous programmable dividers, and a charge pump. The U2896B is designed for cellular phones such as GSM900, DCS1800, and PCS1900, applying transmitter architecture at which the VCO operates at the TX output frequency. No duplexer is needed since the out-of-band noise is very low. The U2896B exhibits low power consumption and broadband operation for high flexibility in multi-band frequency mappings. The IC is available in a shrinked small-outline 36-pin package (SSO36).

U2896B is a modulation PLL for GSM, DCS and PCS systems. The device integrates a mixer, an I/Q modulator, a phase-frequency detector (PFD) with two synchronous programmable dividers, and a charge pump. The U2896B is designed for cellular phones such as GSM900, DCS1800, and PCS1900, applying a transmitter architecture at which the VCO operates at the TX output frequency. No duplexer is needed since the out-of-band noise is very low. The U2896B exhibits low power consumption. Broadband operation provides high flexibility for multi-band frequency mappings. The IC is available in a shrinked small-outline 36-pin package (SSO36).

The U2896B is a monolithic integrated circuit manufactured using TEMIC Semiconductors’ advanced silicon bipolar UHF5S technology. The device integrates a mixer, an I/Q modulator, a phase-frequency detector (PFD) with two synchronous programmable dividers, and a charge pump. The U2896B is designed for cellular phones such as GSM900, DCS1800, and PCS1900, applying a transmitter architecture at which the VCO operates at the TX output frequency. No duplexer is needed since the out-of-band noise is very low. The U2896B exhibits low power consumption. Broadband operation provides high flexibility for multi-band frequency mappings. The IC is available in a shrinked small-outline 36-pin package (SSO36). Electrostatic sensitive device. Observe precautions for handling.

The U2895B is a monolithic integrated circuit designed for cellular phones such as GSM900, DCS1800, and PCS1900, applying a transmitter architecture at which the VCO operates at the TX output frequency. It has low power consumption, high flexibility and small package.

This document describes the features and characteristics of the U2894B monolithic integrated circuit (IC). The IC is designed for cellular phones such as GSM900, DCS1800, and PCS1900. It integrates a mixer, an I/Q modulator, a phase-frequency detector (PFD) with two synchronous programmable dividers, and a charge pump. The IC uses a transmitter architecture in which the VCO operates at the TX output frequency. No duplexer is needed since the out-of-band noise is very low. The U2894B exhibits low power consumption. Broadband operation gives you high flexibility for multi-band frequency mappings. The IC is available in a shrinked small-outline 28-pin package (SSO28). The U2893B offers the same functionality with other divider ratios. This IC is an electrostatic sensitive device. Observe precautions for handling.