Industrial

SPZB250 is a low power consumption ZigBee module based on EM250 ZigBee system-on-chip which integrates a 16-bit processor together with a 2.4 GHz, IEEE 802.15.4-compliant transceiver as well as IEEE 802.15.4 PHY and MAC. It enables OEMs to easily add wireless networking capability to any electronic device. Such a module is a very comprehensive solution to build wireless sensors with meshing and self-healing capability as required in a WSN scenario.

STW81103 is an integrated RF synthesizer with voltage controlled oscillators (VCOs) from STMicroelectronics. It features high performance, high integration, low power, and multi-band performances, making it a low cost, high performance, multi-band RF synthesizer.

This document describes how to program ST7 series microcontrollers through JTAG and bootstrap loader.

The ST7538Q is a Half Duplex synchronous/asynchronous FSK Modem designed for power line communication network applications.

The ST7540 is a Half Duplex synchronous/asynchronous FSK Modem designed for power line communication network applications. It operates from a single supply voltage and integrates a line driver and two linear regulators for 5V and 3.3V.

ST7 FAMILY PROGRAMMING MANUAL, introduces the ST7 series microcontrollers' architecture, functions and usage methods. The ST7 series microcontrollers are based on an industry-standard 8-bit core and a library of peripheral modules, including ROM, EPROM, RAM, EEPROM, I/O, serial interfaces (SPI, SCI, I2C,.), 16-bit timers, etc. These blocks can be assembled in various combinations in order to provide cost-effective solutions for application dedicated products.

STW81102 is a multi-band RF frequency synthesizer with integrated VCOs and integer-N frequency synthesis. It features dual differential integrated VCOs, automatic center frequency calibration, fast lock time, and is suitable for 2.5G and 3G cellular infrastructure equipment, CATV equipment, instrumentation and test equipment, and other wireless communication systems.

STW81101 is a multi-band RF frequency synthesizer with integrated VCOs. It features an integer-N frequency synthesizer, dual differential integrated VCOs with automatic center frequency calibration, excellent integrated phase noise, fast lock time, and more.

The STLC3075 is a SLIC device specifically designed for WLL (Wireless Local Loop), ISDN terminal adaptors, and VoIP applications. One distinctive characteristic of this device is its ability to operate with a single supply voltage (from +4.5 V to +12 V) and to self-generate the negative battery by means of an on-chip DC/DC converter controller that drives an external MOS switch. The battery level is properly adjusted depending on the operating mode. A useful characteristic for these applications is the integrated ringing generator. The control interface is parallel with open-drain output and 3.3 V logic levels. The device also includes features such as a programmable off-hook detector threshold, metering pulse generation and filter, integrated thermal protection, and a dual gain value option.

This document introduces the features and applications of the TSH512 Hi-fi stereo/mono infrared transmitter and stereo sub-carrier generator

The STLC3055N is a SLIC device specifically designed for wireless local loop (WLL) and ISDN- terminal adaptors (ISDN-TA) and VoIP applications. It has a single supply voltage (from 5.5 V to 12 V), self generate the negative battery by means of an on chip DC/DC converter controller that drives an external MOS switch.

The STE100P, also referred to as STEPHY1, is a high performance Fast Ethernet physical layer interface for 10Base-T and 100Base-TX applications. It was designed with advanced CMOS technology to provide a Media Independent Interface (MII) for easy attachment to 10/100 Media Access Controllers (MAC) and a physical media interface for 100Base-TX of IEEE802.3u and 10Base-T of IEEE802.3. The STEPHY1 supports both half-duplex and full-duplex operation, at 10 and 100 Mbps operation. Its operating mode can be set using auto-negotiation, parallel detection or manual control. It also allows for the support of auto-negotiation functions for speed and duplex detection.

The STLC3080 is a SLIC device suitable for a wide range of applications: public (CO), transmis- sion (DLC) and private (PABX).

The TSH511 is a 0.4 to 11MHz dual FM receiver. This circuit offers the functions needed for a highly sensitive infrared hi-fi stereo receiver.

STLC5046 is a monolithic programmable 4 channel codec and filter from ST company. It operates with a single +3.3 V supply. It supports A/µ Law coding, PCM highway format automatic detection, programmable TX gain and RX gain, digital and analog loopbacks, SLIC control port, static mode and dynamic mode, LQFP64 package and PCM in HI-Z mode