Industrial

This document describes the features and characteristics of SENSOR PRODUCTS' 1-axis and 2-axis magnetic sensors HMC1001 / 1002 and HMC1021 / 1022, as well as their applications in compassing systems, attitude reference, traffic detection, and medical devices.

This document introduces the features of the single-phase meter STEVAL-IPE002V1, including current, voltage, frequency, power measurement, and LED indicator, stepper motor display, capacitive power supply and other functions

STEVAL-IPE003V1 is a single-phase electricity meter measurement board with 0.5 class accuracy. It operates at a voltage range of 140 to 300V, current range of 2/20A, frequency range of 45 to 65Hz, and temperature range of -40 to +85°C. This module can be used to build a standalone or microprocessor-based Class 0.5 single-phase electricity meter, with the option of tamper detection for power line systems.

STEVAL-IPE004V1 is a single-phase electricity meter measurement board with 0.5 class accuracy guaranteed, UNOM(RMS) = 140 to 300V, INOM/IMAX(RMS) = 2/20A, fLIN = 45 to 65Hz, TAMB = -40 to +85 °C. It can be used to build a Class 0.5 Single-phase standalone or microprocessor based meter with or without Tamper detection for power line systems of UNOM = 140 to 300VRMS, INOM/IMAX = 2/20ARMS, fLIN = 45 to 65Hz and TAMB = -40 to +85 °C.

This document introduces the STMicroelectronics high-side driver VN808, which features 16 output channels with a maximum current of 0.5A per channel. The driver complies with international standards such as IEC 61000-4-4, IEC 61000-4-5, and IEC 61000-4-6, and has been tested for electromagnetic compatibility and immunity. It is suitable for use in Programmable Logic Controllers to generate digital outputs according to IEC standards.

This is a 6W dual output power supply module produced by STMicroelectronics. Its features include automatic burst mode and undervoltage lockout. The input voltage range is 85 to 264 VAC@50/60Hz, the output voltage is [email protected], and the output power is 6W.

This document provides preliminary information on a new product under development or evaluation. The product is a high power 3-phase auxiliary power supply evaluation board based on L5991 and ESBT STC08DE150HV. It features an input voltage of 400Vac +/- 20%, output voltage 1 of 24V, 6.25A @ 90kHz, output voltage 2 of 5V, 0.075A @ 90kHz, auxiliary output voltage of 15V, 0.01A, maximum output power of 150W, efficiency greater than 85%, switching frequency greater than 90kHz, and standby switching frequency greater than 35kHz.

This file is STEVAL-ISA014V1's Data Brief, introducing the features and characteristics of the product

The STEVAL-CCA003V1 is an evaluation board based on the TS4984 stereo audio power amplifier. It features an operating voltage range of 2.2V to 5.5V, a single-channel output power of 1W, THD+N of 1%, an input current of 10nA, 62dB PSRR @ 217Hz with grounded inputs, a high SNR of 100dB (A-weighted filter), and near-zero pop and click.

STEVAL-TDR007V1 is a 200 W RF power amplifier intended for IFF-1030 MHz interrogator using PD57002-E + PD57018-E + 2 x PD57060-E N-channel lateral MOS field-effect transistors.

The EVAL5985 demonstration board is a fully functional step-down switching regulator with an output current of up to 2A. It has an input voltage range of 2.9V to 18V, adjustable output voltage from 0.6V to 16V, programmable switching frequency up to 1MHz, internal soft-start and inhibit features, low dropout operation with 100% duty cycle, zero-load current operation, and over-current and thermal protection.

This data brief introduces STEVAL-ILL023V1 demonstration board, which is a high-efficiency switching LED driver based on L6726A single phase PWM controller, designed to drive 2.8A LEDs (1-3 in series string) and has exceptional efficiency, easy dimming and scalability to even higher currents.

The STEVAL-TDR001V1 is a two stage RF power amplifier which includes a low pass output filter for harmonics rejection specifically designed for portable two-way UHF radio communication