Torex manuals, page 2
TOREX XC2173 series
The XC2173 series are high frequency, low power consumption CMOS ICs with built-in crystal oscillator, divider and clock multiplier PLL circuits. Output is selectable from any one of the following values for f0 : f0 x 5, f0 x 6, f0 x 7, f0 x 8, f0/2, f0/4, f0/8. With an oscillation capacitor & oscillation feedback resistor built-in, a stable oscillator circuit can be put together using only an external crystal oscillator. By connecting an external standard clock, the above mentioned output frequencies can be achieved.
TOREX XC9504 Series handbook
XC9504 series are PWM control, PWM/PFM switching, 2 channel (step-up and inverting) DC/DC controller ICs.
TOREX XC62FP Series handbook
XC62FP series is a group of high precision, high reliability, low power consumption, small input / output voltage differential three pin regulators
TOREX XC6216/XE6216Series Voltage Regulators with Stand-by Function - Input Voltage: 28V handbook
XC6216/XE6216 series voltage regulators are positive voltage regulator ICs with 28V of operation voltage. The series consists of a voltage reference, an error amplifier, a current limiter, a thermal shutdown circuit and a phase compensation circuit plus a driver transistor. The output voltage is selectable in 100mV increments within the range of 2.0V to 12V using laser trimming technologies. With external resistors, the output voltage range can be expanded from 2.0V to 23V. The series’ output stabilization capacitor (CL) is also compatible with low ESR ceramic capacitors. The over current protection circuit and the thermal shutdown circuit are built-in. These two protection circuits will operate when the output current exceeds the specified current in the product datasheet.
TOREX XC25BS6 SERIES DATA SHEET
XC25BS6 series are clock generators with built-in crystal oscillator circuit
TOREX XC6101 XC6107 XC6111 XC6117 series
XC6101_07_XC6111_17 are CMOS voltage detectors with manual reset input function and watchdog functions, built-in delay circuit, detect voltage range is 1.6~5.0V, ± 2%, reset function is selectable VDFL (low voltage detection) and VDFH (high voltage detection).
TOREX XC6201 Series handbook
The XC6201 series is a highly precise, low power consumption, positive voltage regulator manufactured using CMOS and laser trimming technologies. The series provides large currents with a significantly small dropout voltage. The XC6201 consists of a current limiter circuit, a driver transistor, a precision reference voltage, and an error amplifier. Output voltage is selectable in 0.1V steps between 1.3V ~ 6.0V. SOT-25 (250mW), SOT-89 (500mW), and TO-92 (300mW) packages are available.
TOREX XC6401Series Dual LDO Regulators Low ESR Cap. Compatible
XC6401 series are highly accurate, dual, low noise, CMOS LDO voltage regulators. Performance features of the series includes low output noise, high ripple rejection ratio, low dropout and very fast turn-on times. The XC6401 includes a reference voltage source, error amplifiers, driver transistors, current limiters and phase compensators internally. The XC6401’s current limiters' foldback circuit also operates as a short protect for the output current limiter. The output voltage for each regulator is set independently by laser trimming. Voltages are selectable in 50mV steps within a range of 0.8V to 5.0V. The XC6401 series is also fully compatible with low ESR ceramic capacitors, reducing cost and improving output stability. This high level of output stability is maintained even during frequent load fluctuations, due to the excellent transient response performance and high PSRR achieved across a broad range of frequencies. The EN function allows the output of each regulator to be turned off independently, resulting in greatly reduced power consumption. The XC6401 series is available in the SOT-26W or USP-6B, USP-6C ‘chip-scale’ package.
TOREX XC6201 series
The XC6201 series are highly precise, low power consumption, positive voltage regulators manufactured using CMOS and laser trimming technologies. The series provides large currents with a significantly small dropout voltage. The XC6201 consists of a current limiter circuit, a driver transistor, a precision reference voltage and an error amplifier. Output voltage is selectable in 0.1V steps between 1.3V ~ 6.0V. SOT-25 (250mW), SOT-89 (500mW) and TO-92 (300mW) packages are available.
TOREX XC6203 series
The XC6203E series are highly precise, low power consumption, positive voltage regulators manufactured using CMOS and laser trimming technologies. The series provides large currents with a significantly small dropout voltage. The XC6203E consists of a driver transistor, a precision reference voltage and an error amplifier. Output voltage is selectable in 0.1V steps between a voltage of 1.8V and 6.0V. Available packages include SOT-89 (500mW), SOT-223 (1200mW) and TO-92 (300mW).
TOREX XC6201 SERIES DATA SHEET
The XC6201 series are highly precise, low power consumption, positive voltage regulators manufactured using CMOS and laser trimming technologies. The series provides large currents with a significantly small dropout voltage. The XC6201 consists of a current limiter circuit, a driver transistor, a precision reference voltage and an error amplifier. Output voltage is selectable in 0.1V steps between 1.3V ~ 6.0V. SOT-25 (250mW), SOT-89 (500mW) and TO-92 (300mW) packages are available.
TOREX XC62FP Series Manual
The XC62FP series is a group of positive voltage output, three-pin regulators, that provide a high current even when the input/output voltage differential is small. Low power consumption and high accuracy is achieved through CMOS and laser trimming technologies. The XC62FP consists of a high-precision voltage reference, an error amplification circuit, and a current limited output driver. Transient response to load variations have improved in comparison to the existing series. SOT-23 (150mW), SOT-89 (500mW) and TO-92 (300mW) packages are available. Maximum Output Current : 250mA (within max. power dissipation, VOUT = 5.0V) Output Voltage Range : 2.0V ~ 6.0V in 0.1V increments (1.5V ~ 1.9V for custom products) Highly Accurate: Output voltage ±2% (±1% for semi-custom products) Low Power Consumption : Typ. 2.0µA @ VOUT=5.0V Output Voltage Temperature Characteristics : Typ. ±100ppm/°C Input Stability : Typ. 0.2%/V Small Input-Output Differential : IOUT = 100mA @ VOUT = 5.0V with a 0.12V differential. Ultra Small Packages : SOT-23 (150mW) mini-mold, SOT-89 (500mW) mini-power mold TO-92 (300mW) GBattery Powered Equipment GPalmtops GPortable Cameras and Video Recorders GReference Voltage Sources NCMOS Low Power Consumption NSmall Input-Output Voltage Differential : 0.12V @ 100mA, 0.38V @ 200mA NMaximum Output Current : 250mA (VOUT=5.0V) NOutput Voltage Range : 2.0V~6.0V NHighly Accurate : ±2% (±1%)
TOREX XC6406 Series High Current Dual Positive Regulator Manual
The XC6406 series are highly precise, low power consumption, dual positive regulators. They have high current and low dropout voltage characteristics, and the output voltage can be selected within the range of 1.8V to 6.0V.
TOREX XC6204 Data Sheet
The XC6204 series are high precision, low noise, positive voltage LDO regulators manufactured using CMOS processes. The series achieves high ripple rejection and low dropout and consists of a standard voltage source, an error correction, current limiter and a phase compensation circuit plus a driver transistor. Output voltage is selectable in 50mV increments within a range of 1.8V ~ 6.0V. The series is also compatible with low ESR ceramic capacitors which give added output stability. This stability can be maintained even during load fluctuations due to the excellent transient response of the series. The current limiter's foldback circuit also operates as a short protect for the output current limiter and the output pin. The CE function enables the output to be turned off, resulting in greatly reduced power consumption.
TOREX XC6802 Series handbook
The XC6802 series is a constant-current/constant-voltage linear charger IC for single cell lithium-ion batteries, featuring constant-current/constant-voltage charge circuit, over heat protection circuit, and phase compensation circuit.