STMicroelectronics Manuals

VIPer20/20A, made using VIPower M0 Technology, is a SMPS primary IC that combines an adjustable switching frequency (up to 200kHz), current mode control, soft start and shutdown control, automatic burst mode operation in standby condition able to meet 'blue angel' norm (<1W total power consumption), internally trimmed zener reference, undervoltage lock-out with hysteresis, integrated start-up supply, avalanche rugged, overtemperature protection, low standby current, and adjustable current limitation.

The TSH110 is a low noise, low supply current, high output current, bandwidth of 100MHz, supply voltage of 5V to 12V, slew rate of 450V/µs, specified for 100Ω load, very low distortion, tiny SOT23-5, TSSOP and SO packages operational amplifier.

M48T58 M48T58Y is a product that integrates ultra-low power SRAM, real-time clock, power-fail control circuit, and battery. It features byte-wide RAM-like clock access, BCD-coded year, month, day, date, hours, minutes, and seconds, frequency test output for real-time clock, and automatic power-fail chip deselect and write protection.

The TS461/2/4 is a family of low noise, low distortion, high dynamic range operational amplifiers that can operate with voltages as low as ±1.35V and to reach a minimum of ±2Vpp of output swing when supplied with ±2.5V.

This document describes the features and characteristics of the M48T37Y and M48T37V products. These products are chips that integrate ultra-low power SRAM, real-time clock, battery, and power-fail control circuit. They feature a frequency test output, year 2000 compliance, automatic power-fail chip deselect and write protection, watchdog timer, programmable alarm output, etc. They also provide their respective operating voltage ranges and packaging forms.

STS5PF30L is a P-channel MOSFET from STMicroelectronics. It features low on-resistance, high reliability, and low power consumption. It is suitable for use in battery management and power management in cellular phones.

M93C86, M93C76, M93C66 M93C56, M93C46 16Kbit, 8Kbit, 4Kbit, 2Kbit and 1Kbit (8-bit or 16-bit wide) MICROWIRE® Serial Access EEPROM is industry standard MICROWIRE Bus single supply voltage 4.5 to 5.5V dual organization by Word (x16) or Byte (x8) programming instructions work on Byte, Word or Entire Memory self-timed programming cycle with auto-erase ready/busy signal speed 1MHz Clock Rate, 10ms Write Time sequential read operation enhanced ESD/Latch-Up Behaviour more than 1 Million Erase/Write Cycles more than 40 Year Data Retention

This document describes the M48Z129Y* and M48Z129V models of 5.0V or 3.3V 1Mbit (128 Kb x 8) ZEROPOWER® SRAM, which feature integrated ultra-low power SRAM, power-fail control circuit, and battery. It has conventional SRAM operation, unlimited write cycles, 10 years of data retention, microprocessor power-on reset, battery low pin for end-of-life warning, automatic power-fail chip deselect and write protection, and pin and function compatibility with JEDEC standard 128K x 8 SRAM.

The LD1585C is a low dropout voltage regulator capable of providing up to 5A of output current. The device features a low dropout voltage and very fast transient response. It is suitable for low voltage applications where transient response and minimum input voltage are critical.

The LM134/LM234/LM334 are 3-terminal adjustable current sources characterized by a operating current range of 10000:1, an excellent current regulation and a wide dynamic voltage range of 1V to 10V. The current is determined by an external resistor without requiring other external components. Reverse voltages of up to 20V will only draw a current of several microamperes. This enables the circuit to operate as a rectifier and as a source of current in a.c. applications. For the LM134/LM234/LM334, the voltage on the control pin is 64mV at +25°C and is directly proportional to the absolute temperature (°K). The simplest external resistor connection generates a current with ≈ 0.33%/°C temperature dependence. Zero drift can be obtained by adding an additional resistor and a diode to the external circuit.

M48T59 is an integrated ultra low power SRAM, real time clock, power-fail control circuit and battery product launched by ST company. It has frequency test output, automatic power-fail chip deselect and write protection.

This document introduces the uPSD Turbo series USB microcontroller development kit DK3400 released by STMicroelectronics. The kit is a demo board for the uPSD3400 family of microcontrollers, which feature a fast Turbo Plus 8032 core with a 16-bit code fetch path, full-speed USB port, large Dual Bank Flash memory, large SRAM, numerous peripherals, programmable logic, and a JTAG Debug/In System Programming (ISP) port. The DK3400 kit includes an ED3K4 module and DK3400 motherboard, as well as all the necessary items to explore the uPSD3400 MCU. It also provides demonstration application examples and an evaluation copy of the tools needed to develop and compile code for the uPSD3400.

The TS924 is a low noise, low distortion, high output current quad operational amplifier. Suitable for applications requiring low voltage, low noise, and high current.

L6599 is a high-voltage resonant controller from ST company, it features 50% duty cycle, variable frequency control of resonant half-bridge, high-accuracy oscillator, up to 500kHz operating frequency, two-level OCP, interface with PFC controller, latched disable input, light load burst-mode operation, input for power-ON/OFF sequencing or brownout protection, non-linear soft-start for monotonic output voltage rise, 600V-rail compatible high-side gate driver with integrated bootstrap diode and high dV/dt immunity, -300/800mA high-side and low-side gate drivers with UVLO pull-down