Optek manuals, page 2
OPTEK KT930-KT940 SERIES
OPTEK slotted optical switches types OPB830L OPB840L series
OPTEK KT830 - KT840 SERIES SLOTTED OPTICAL SWITCHES PHOTOTRANSISTOR OUTPUT
OPTEK Types OPB826S OPB826SD
OPTEK OHN3075U OHS3075U Data sheet
OPTEK - OPB916 series Fea tures Choice of output configuration 24 min 26 AWG wires Low power consumption De scrip t
The OPB916 consists of an infrared emitting diode and a Photologic photo integrated circuit, and it features choice of output configuration and low power consumption.
OPTEK Photologic Slotted Op ti cal Switches Type OPB917 Series
The OPB917 series is a series of infrared emitting diodes and photo integrated circuits produced by Optek company. It is a modular design that provides users with multiple choices, including output configuration, external size, and electrical output type. The product has low power consumption, long optical path, and is suitable for various automation control fields.
OPTEK 5 MBd Fi ber Op tic Re ceiver Type OPF522
The OPF522 is a component that is pre-mounted and ready to use. It has been pre-tested with fiber to ensure performance. It features a popular style receptacle and is optimized for fiber optic applications using 50 to 200 micron fiber.
OPTEK 125 MHz Fiber Optic Receiver Types OPF560 OPF561 OPF562 handbook
The OPF560 series receiver is a low cost solution for high speed fiber optic communication designs. The output of the receiver is an analog, low impedance, emitter follower voltage source capable of driving an amplifier or level translating circuitry. This allows the subsequent circuitry to use the device in either the analog mode or translated to ECL/TTL levels for use in a digital mode at data rates up to 155MBaud. The receiver is comprised of a high speed, low noise, photodiode coupled to a transimpedance amplifier which produces an output voltage proportional to the input light amplitude. This hybrid approach solves many of the problems of high speed data link designs by placing a pre-amplifier close to the photodiode. The amplification of the transimpedance amplifier makes the output signal much less susceptible to EMI.
OPTEK OPF322A/OPF322B/OPF322C handbook
The OPF322 series LED consists of a hermetic LED, pre-mounted and aligned in an ST* receptacle. This configuration is designed for PC board or panel mounting. Includes lock washer and jam nut, two 2-56 screws, and a dust cap. The LED’s are designed to interface with multimode optical fibers from 50/125 to 200/300 microns.
OPTEK Pho tologic Slot ted Op ti cal Switches Types OPB960 OPB970 Se ries
The OPB960 and OPB970 series of Photologic Photo Integrated Circuit Switches provide optimum flexibility for the design engineer. Building from a standard housing with a .125” wide slot, the user can specify (1) type and polarity of TTL output, (2) discrete shell material, (3) aperture width, and (4) type of mounting configuration. Available with 24”, 26AWG wire leads as OPB980/OPB990 series.
OPTEK - OPTEK Technology Inc.Photologic Slotted Optical Switch OPB960 OPB970 OPB980 OPB990 Series
The OPB960/ 970/ 980/ 990 series of non-contact Photologic® slotted optical switches provides flexibility in meeting application specific requirements for the design engineer.
OPTEK Round LED Lamp (3 mm) OVLAx6CB8 Series
This document introduces the OVLAx6CB8 series of round LED lamps (3mm) by OPTEK, which have a viewing angle of 65° and uniform light output. The series is designed for indicators in medical, industrial, consumer, and office equipment, as well as indicators for white goods and home appliances, interior and exterior architectural and accent lighting, signs and digital information displays, automotive backlighting and indicators.
OPTEK Full Color PLCC6 LED
OVSTRGBBCR8 is a full-color PLCC6 LED from OPTEK. It has red, green and blue colors and a PLCC package. It has a wide viewing angle, high performance and can be tuned to a variety of colors.
OPTEK OVLAW4CB7 Data Sheet
This document is the OVLAW4CB7 LED product datasheet of OPTEK company. It mainly introduces the characteristics of the product, including high luminous intensity, through-hole type, water crystal lens, available on tape and reel. The product is used for various indicators of medical, industrial, consumer and office equipment, white household appliances indicators, architectural and accent lighting etc.