OPTEK Manuals

The OPB720A Series reflective switches detect objects as far away as 24” (610 mm) using standard 90% reflective material, and can detect objects as small as 0.08” (2 mm). The OPB720A sensor is not affected by ambient light in most conditions, as it compensates for ambient light using a synchronous driver detection scheme. It has a logical output that switches from a high level with no reflection target to a low level with a reflection target. The OPB720A series minimizes switching oscillations on the output by adding hysteresis. The series can be used in either a reflective or interruptive mode depending on the type of material used for the target.

OPTEK OPB720A and OPB720B series long distance reflective switches can detect objects up to 12 inches (305 mm) using standard 90% reflective material, and can detect objects as small as 0.08 inches (2 mm).

OPTEK Long Distance Reflective Switch OPB720A and OPB720B Series. The OPB720A and OPB720B Series reflective switches detects objects as far away as 12” (305 mm) using standard 90% reflective material, and can detect objects as small as 0.08” (2 mm).

The document describes the features and characteristics of the Photologic® reflective object sensors produced by OPTEK, including mounting configurations, output configurations, electrical output, PCB mounting, and wire length. The product can be used for non-contact object sensing, assembly line automation, machine automation, and other applications.

OVLEW1CB9 is a 5mm round white high-intensity LED lamp with a 15° viewing angle. It is designed for applications that require high luminous intensity, such as indoor and outdoor displays, marker lights and optical indicators. The phosphor used in the reflector converts the blue emission of the InGaN chip to ideal white light so that the best mode of white light intensity and CIE chromaticity are achieved.

OPTEK OVLEW3CB6 is a round, 5 mm white high-intensity lamp with a 30 degree viewing angle and standoffs. It is designed for applications that require high luminous intensity, such as indoor and outdoor displays, marker lights and optical indicators.

OVSARGB3R8 is a full-color PLCC4 LED from OPTEK. It has a size of 3.5 x 2.8 x 1.9 mm, a viewing angle of 120°, and is compatible with infrared and vapor phase reflow solder. It can be used in applications such as handheld appliances and automotive interiors.

OPTEK OVSAABC2R8 is a surface mounted LED with amber emission. The product features high intensity, low power consumption, compatibility with automatic placement equipment, dimensions of 3.5 x 2.8 x 1.95 mm and a viewing angle of 120°. It is widely used in traffic lights, signal and symbol luminaires, monochrome indicators, backlighting, interior automotive lighting and safety marker lights.

The OPB780Z reflective color sensor assembly features high-resolution conversion of light intensity to frequency, selectable color output frequency, direct communication with a microcontroller, sensor power supply operation (2.7 V to 5.5 V), and a separate LED power input.

The Power Line Designer Kit 0.5-Watt LED Modules OVPL5W3K is a flexible and scalable lighting solution using mid-power LEDs to supply high luminous flux without additional heatsinking requirements. The kit includes components and instructions to allow a designer to configure LED placement as needed for uniform illumination in his application. With a 15-volt power supply, the Power Line Kit is a total lighting solution.

The OVLEW5CB6 is a 5 mm white high-intensity lamp with a 50° viewing angle and stand-offs. It is designed for applications that require high luminous intensity, such as indoor and outdoor displays, marker lights and optical indicators.

This document describes the features and characteristics of the red PLCC4 surface mount LED product produced by OPTEK. It includes high brightness, low power consumption, compatibility with automatic placement equipment, wide viewing angle, etc. The product is suitable for applications such as traffic lights, indicators, backlighting, and interior automotive lighting.

This document is the OVLAW4CB7 LED product datasheet of OPTEK company. It mainly introduces the characteristics of the product, including high luminous intensity, through-hole type, water crystal lens, available on tape and reel. The product is used for various indicators of medical, industrial, consumer and office equipment, white household appliances indicators, architectural and accent lighting etc.

OVSTRGBBCR8 is a full-color PLCC6 LED from OPTEK. It has red, green and blue colors and a PLCC package. It has a wide viewing angle, high performance and can be tuned to a variety of colors.