AVAGO Manuals

The SPFEIM100_G is a high-speed fiber optic transceiver for converting high-speed binary data to differential digital data. It supports Fast Ethernet with a data rate of up to 100Mbit/s (125MBaud). It features integrated EMI shielding, operates at a temperature range of 0°C to 70°C, and uses a 3.3V power supply. It supports thin and flexible Plastic Optical Fiber (POF) with a 1.5mm outer jacket diameter and has a fiber pull-out strength of over 20N at 25°C. The transceiver uses a 650nm LED with an integrated driving circuit and does not toggle the LED when there are no signals on the input data lines.

This is a SMT LED with industry standard PLCC-2 package, high reliability performance, suitable for a wide range of environmental conditions.

This document introduces the features and characteristics of a series of HSMx-C series LED products, including size, package, and available colors.

The MoonstoneTM 1W Power LED Light Source is a high performance energy efficient device which can handle high thermal and high driving current. The exposed pad design has excellent heat transfer from the package to the motherboard. The Cool White Power LED is available in various color temperature ranging from 4000K to 10000K and Warm White Power LED ranging from 2600K to 4000K. The low profile package design is suitable for a wide variety of applications especially where height is a constraint. The package is compatible with reflow soldering process. This will give more freedom and flexibility to the light source designer.

The HSMR-CL25 series is a top emitting LED with an ultra small form factor and high brightness InGaN die technology. It features a superior package leadframe design for high thermal dissipation capability, small footprint, and low thickness. It is suitable for keypad backlighting, push button backlighting, and status indicators.

The Avago ultra low power ACPL-x6xL digital optocouplers combine an AlGaAs light emitting diode (LED) and an integrated high gain photodetector. The optocoupler consumes extremely low power, at maximum 1.3mA IDD2 current per channel across temperature. With a forward LED current as low as 1.6 mA most microprocessors can directly drive the LED. An internal Faraday shield provides a guaranteed common mode transient immunity specification of 20 kV/μs. Maximum AC and DC circuit isolation is achieved while maintaining TTL/CMOS compatibility. The optocouplers CMOS outputs are slew-rate controlled and is designed to allow the rise and fall time to be controlled over a wide load capacitance range. The ACPL-x6xL series operates from both 3.3 V and 5 V supply voltages with guaranteed AC and DC performance from –40°C to +105°C. These low-power optocouplers are suitable for high speed logic interface applications.

ACSL-6xx0 is a fully digital logic gate optocoupler, providing full duplex and bidirectional isolated data transfer and communication capability. Available in 8-pin and 16-pin narrow-body SOIC packages and specified over the temperature range of -40°C to +100°C

This document describes the features and characteristics of the Agilent MGA-83563 +22 dBm PSAT 3V Power Amplifier, including wide frequency range, high power output, and high efficiency.

The HSMP-389x & HSMP-489x Series Surface Mount RF PIN Switch Diodes Data Sheet introduces the characteristics of the products, such as unique configurations, surface mount packages, low capacitance, low resistance, low failure rate, matched diodes, and higher power dissipation.

This document describes a series of optocouplers with high current transfer ratio, which use a light emitting diode and an integrated high gain photodetector to provide extremely high current transfer ratio between input and output. It features low input current requirements, TTL compatible output, and high output current.

This data sheet introduces the features and characteristics of Agilent ACSL-6xx0 multi-channel and bi-directional, 15 MBd digital logic gate optocouplers.

HEDM-55xx/560x&HEDS-55xx/56xx Quick Assembly Two/Three Channel Optical Encoders Data Sheet

This document details the technical specifications of the 20mm seven-segment display products, including colors, packages, pins, features and characteristics.

HDSP-C5x1/C5x3 0.52” Single Digit PCB Based LED Display Data Sheet, this display is 0.52 inches high, uses GaAsP/GaP red, orange, yellow, green and AlGaAs/GaAs red chips, has high reliability, excellent appearance, can be used in CA and CC, meets RoHS standards, gray top surface with white diffused segments

The HCMS-29xx series are high performance, easy to use dot matrix displays driven by on-board CMOS ICs. Each display can be directly interfaced with a microprocessor, thus eliminating the need for cumbersome interface components. The serial IC interface allows higher character count information displays with a minimum of data lines. A variety of colors, font heights, and character counts give designers a wide range of choices to meet the needs of various applications.