Atmel manuals, page 26
ATMEL AT27LV020A handbook
The AT27LV020A is a high-performance, low-power, low-voltage 2,097,152-bit one-time programmable read-only memory (OTP EPROM) organized as 256K by 8 bits. It requires only one supply in the range of 3.0 to 3.6V in normal read mode operation, making it ideal for fast, portable systems using battery power. Atmel’s innovative design techniques provide fast speeds that rival 5V parts while keeping the low power consumption of a 3V supply. At VCC = 3.0V, any byte can be accessed in less than 120 ns. With a typical power dissipation of only 18 mW at 5 MHz and VCC = 3.3V, the AT27LV020A consumes less than one fifth the power of a standard 5V EPROM. Standby mode supply current is typically less than 1 µA, making the AT27LV020A an ideal choice for battery-powered applications.
ATMEL AT27LV040A handbook
The AT27LV040A is a high-performance, low-power, low-voltage, 4,194,304-bit one-time programmable read-only memory (OTP EPROM) organized as 512K by 8 bits. It requires only one supply in the range of 3.0 to 3.6V in normal read mode operation, making it ideal for fast, portable systems using battery power. Atmel’s innovative design techniques provide fast speeds that rival 5V parts while keeping the low power consumption of a 3V supply. At VCC = 3.0V, any byte can be accessed in less than 90 ns. With a typical power dissipation of only 18 mW at 5 MHz and VCC = 3.3V, the AT27LV040A consumes less than one half the power of a standard 5V EPROM. Standby mode supply current is typically less than 1 µA at 3.3V.
ATMEL AT27LV256A handbook
The AT27LV256A is a high-performance, low-power, low-voltage 262,144-bit one-time programmable read-only memory (OTP EPROM) organized as 32K by 8 bits. It requires only one supply in the range of 3.0V to 3.6V in normal read mode operation, making it ideal for fast, portable systems using battery power. Atmel’s innovative design techniques provide fast speeds that rival 5V parts while keeping the low power consumption of a 3.3V supply. At VCC = 3.0V, any byte can be accessed in less than 55 ns. With a typical power dissipation of only 18 mW at 5 MHz and VCC = 3.3V, the AT27LV256A consumes less than one fifth the power of a standard 5V EPROM. Standby mode supply current is typically less than 1 µA at 3.3V. The AT27LV256A is available in industrial temperature range.
ATMEL AT27LV512A handbook
The AT27LV512A is a high-performance, low-power, low-voltage OTP EPROM, suitable for fast, portable systems using battery power. It features fast read access time, dual voltage range operation, low power consumption in standby mode, and rapid programming algorithm.
ATMEL AT27BV512 handbook
The AT27BV512 is a high-performance, low-power, low-voltage 524,288-bit one-time programmable read-only memory (OTP EPROM) organized as 64K by 8 bits. It requires only one supply in the range of 2.7 to 3.6V in normal read mode operation, making it ideal for fast, portable systems using either regulated or unregulated battery power. Atmel’s innovative design techniques provide fast speeds that rival 5V parts while keeping the low power consumption of a 3V supply. At VCC = 2.7V, any byte can be accessed in less than 70 ns. With a typical power consumption of only 18 mW at 5 MHz and VCC = 3V, the AT27BV512 consumes less than one fifth the power of a standard 5V EPROM. Standby mode supply current is typically less than 1 µA.
ATMEL Application Note (AN-4) Using Atmel s DataFlash handbook
This document introduces Atmel's DataFlash series, a Flash memory designed for data and code storage applications using NOR technology. It offers small page sizes, providing system designers with flexibility and simplifying data modifications. DataFlash also features a simple serial interface, facilitating hardware layout, increasing system reliability, and minimizing switching noise. It is well-suited for digital voice, image, code, and data storage applications, especially where low power consumption is required.
ATMEL MicroLeadFrame Packages Pad Landing Recommendations Application Note handbook
This application note provides guidelines for designing PCBs that mount Atmel’s DataFlash memories in MicroLeadFrame® packages. The MicroLeadFrame package is a leadless package where electrical contact to the PCB is made by soldering the lands on the bottom surface of the package to the PCB, instead of the conventional formed perimeter leads.
ATMEL Atmel PLD programming logic device ATF1504AS ATF1504ASL handbook
This product is a high-density, high-performance, electrically erasable complex programmable logic device, with features of 64 macrocells, 5 product terms per macrocell, expandable to 40 per macrocell, 44, 68, 84, 100 pins, maximum pin-to-pin delay of 7.5 ns, registered operation speed up to 125 MHz, and enhanced routing resources
Atmel ATF15xx Family: ISP Devices User Guide
This document is a user guide for Atmel ATF15xx Family ISP Devices, providing information on the features and usage of the devices.
Atmel CPLD Reference Designs Prove Logic Doubling Works Manual
This white paper introduces a method for improving the I/O connectivity and logic reusability of Complex Programmable Logic Devices (CPLDs). This method, called Logic Doubling, works by splitting the logic circuit into two logic blocks and using different logic circuits in each logic block. This allows CPLDs to support more I/O ports and improve the reusability of logic circuits.
ATMEL ATV750B/BL to ATF750C/CL Manual
This application note describes the differences between the ATV750B/BL PLD and the ATF750C/CL PLD, including features, packages, temperature grades, etc.
ATMEL Using the ATV750 ATV750B Manual
This document describes how to use the features of the ATV750 and ATV750B in the ABEL and CUPL high level description languages. The ATV750 and ATV750B are easy upgrades from a 22V10, offering twice the logic density and more flexibility in the same footprint. Both devices have 20 registers and individual clock and AR product terms for each register. Each I/O pin has a programmable polarity control and an individual output enable product term. Independent feedback paths from each register allow all of the registers to be buried without wasting the I/O pins. For the ATV750B, the registers can also be configured as D- or T-type and the clock can be selected as either a synchronous clock pin or a clock product term.
ATMEL Using a PLD as a System Controller in an I/O Bus Based System Manual
This document introduces how to use programmable logic devices as system controllers based on I/O buses
ATMEL Saving Power with Atmel PLDs Manual
This document introduces the low-power features of Atmel PLDs, including the various density classes of Atmel PLDs and Atmel PLD's Input Transition Detection (ITD) technology. Atmel PLD's Input Transition Detection technology can significantly reduce power consumption.
ATMEL Using the ATV2500 ATV2500B Manual
This document describes how to use the features of the ATV2500 and ATV2500B in the ABEL (and Atmel- ABEL) and CUPL (and Atmel-CUPL) high level description languages. The ATV2500 and ATV2500B are the most powerful programmable logic devices available in a 40/44-pin package. They combine high density and global routing, making them easy to use and understand. Both devices have 24 macrocells, each with three sum terms, two regis- ters, and 17 product terms. Each register has individual clock and AR product terms. Each I/O pin has a programmable polarity control and an individual output enable product term. Independent feed- back paths from each register allow all of the registers to be buried without wasting the I/O pins. A universal bus routes all input and feedback signals to all product terms on all macrocells. The ATV2500B has the additional features of D- or T-type configurable registers, three dif- ferent clock options, and buried combinatorial nodes.