Siemens Manuals

TLE4262G is a 5V low-drop voltage regulator with a maximum input voltage of 45V and a maximum output current of 200mA.

TLE 4261-2 is a high accuracy 5-V low-drop voltage regulator in a P-TO220-7 or in a P- DSO package. The maximum input voltage is 42 V (65 V/≤ 400 ms). The device can produce an output current of more than 500 mA. It is short-circuit-proof and incorporates temperature protection that disables the circuit at impermissibly high temperatures.

This document describes the features and characteristics of the TLE 4261 semiconductor group, including very low-drop voltage, very low quiescent current, low starting-current consumption, proof against reverse polarity, input voltage up to 42V, overvoltage protection up to 65V, short-circuit proof, external setting of reset delay, integrated watchdog circuit, wide temperature range, overtemperature protection, suitable for automotive use, and EMC proofed.

TLE 4260 is a 5V low-drop fixed-voltage regulator with features of low-drop voltage, very low quiescent current, low starting current consumption, integrated temperature protection, and reverse polarity protection. It is suitable for automotive electronics and other applications.

TLE 4260/S is a 5V low-drop fixed-voltage regulator in a P-TO220-5-H/S package. The maximum input voltage is 42V (65V/≤400ms). The device can produce an output current of more than 500mA. It is short-circuit-proof and incorporates temperature protection that disables the circuit at unpermissibly high temperatures. Due to the wide temperature range of – 40 to 150 °C, the TLE 4260/S is also suitable for use in automotive applications. The IC regulates an input voltage VI in the range 6 < VI < 35 V to VQnominal = 5.0 V. A reset signal is generated for an output voltage of VQ < 4.75 V. The reset delay can be set externally with a capacitor. If the output current is reduced below 10 mA, the regulator switches internally to standby and the reset generator is turned off. The standby current drops to max. 700 µA.

TLE 4226 G is an integrated sixfold low-side power switch with power limiting of the 0.5 A outputs, shorted-load protection of the 50 mA switches and Z-diodes on all switches from output to ground. TLE 4226 G is particularly suitable for automotive and industrial applications.

TLE 4226 G is an integrated, sixfold low-side power switch with power limiting of the 0.5 A outputs, shorted-load protection of the 50 mA switches and Z-diodes on all switches from output to ground. TLE 4226 G is particularly suitable for automotive and industrial applications.

TLE 4224-2/S2 is a single-channel low-side switch from Texas Instruments. It uses Smart Power Technology (SPT) and has a µC-compatible input and open-drain DMOS output stage. This device is fully protected by embedded protection functions and is designed for automotive and industrial applications.

TLE 4216 G is a Texas Instruments integrated sixfold low-side power switch with power limiting of the 0.5 A outputs, shorted load protection of the 50 mA switches and Z-diodes on all switches from output to ground. TLE 4216 G is particularly suitable for automotive and industrial applications.

TLE4214G is a double low-side switch with 2x0.5A current limiting, overtemperature shutdown, overvoltage shutdown, status monitoring, shorted-load protection and integrated clamp diodes.

TLE 4214 G is a double low-side switch with a rated current of 2 x 0.5 A and a maximum short-circuit current of 1 A. It features integrated clamp diodes to limit the current in short-circuit conditions.

The TLE 4211 is a double low-side switch from Texas Instruments with 2 x 2 A current capability, built-in overtemperature protection and short circuit protection, and can be controlled via TTL signals.

This document introduces the TLE 4211 Intelligent Double Low-Side Switch from Dinghao Semiconductor Group, which features double low-side switches, power limitation, overtemperature shutdown, status monitoring, shorted-load protection, reverse polarity protection, integrated clamp Z-Diodes, and voltage proof up to 70V.

The 1-A Quad-Half-Bridge Driver TLE 4208 is a fully protected Quad-Half-Bridge Driver designed specially for automotive and industrial motion control applications

The TLE 4208 is a fully protected Quad-Half-Bridge-Driver designed specially for automotive and industrial motion control applications. It can drive up to 3 motors with a continuous output current of up to 0.8A. The driver has very low current consumption in stand-by mode, low saturation voltage, and built-in protection features. It is built using Siemens' bipolar high voltage power technology DOPL and is suitable for DC motor management applications.