ST Manuals

L5150BN is a 5V low dropout linear regulator from ST. It has a wide operating voltage range (5.6V-40V), a low dropout voltage (500mV), a low quiescent current (50uA), and a high output voltage accuracy (±2%). It also has undervoltage protection, overcurrent protection, and overtemperature protection.

L5150GJ is a low dropout linear regulator with microprocessor control functions such as power on reset, low voltage reset, early warning, on/off control. Typical quiescent current is 55μA in very low output current mode and enabled regulator. It drops to 5μA with not enabled regulator. On chip trimming results in high output voltage accurancy (2%). Accurancy is kept over wide temperature range, line and load variation. Early warning circuit monitors the input voltage and compares it to an internal voltage reference. Output voltage reset threshold can be adjusted down to 3.5V by means of an external voltage divider. The maximum input voltage is 40V. The max output current is internally limited. Internal temperature protection disables the voltage regulator output. In addition, only low-value ceramic capacitor on output is required for stability.

This document introduces the features and characteristics of the VND5E050MJ-E and VND5E050MK-E dual-channel high-side drivers, including power management, input voltage, current detection, protection mechanisms, etc., which are suitable for various resistive, inductive and capacitive loads, and are also suitable for LED drivers

This document provides information on a product called L5300EPT, which is a low dropout linear regulator with a 5V output voltage, a current capability of 300mA, and a wide temperature range of -40°C to 150°C. It also features thermal shutdown and short-circuit protection.

The L5300GJ is a low dropout linear regulator with microprocessor control functions such as power on reset, low voltage reset, early warning, ON/OFF control. Typical quiescent current is 55 µA in very low output current mode and enabled regulator. It drops to 5µA with not enabled regulator. On-chip trimming results in high output voltage accuracy (2%). Accuracy is kept over wide temperature range, line and load variation. Early warning circuit monitors the input voltage and compares it with an internal voltage reference. The maximum input voltage is 40 V. The maximum output current is internally limited. Internal temperature protection disables the voltage regulator output. In addition, only low value ceramic capacitor on output is required for stability (equal or above 220 nF).

L5300RPT is a low dropout linear regulator from STMicroelectronics with an output precision of 5V +/- 2%, a maximum input voltage of 40V and a maximum output current of 300mA.

L5300AH7 is a low dropout linear regulator with microprocessor control functions such as power on reset, low voltage reset, ON/OFF control. In addition, only low value ceramic capacitor is required for stability (above or equal 220 nF). Typical quiescent current is 60 µA at output current equal to 0 and enable high. It drops to 10 µA in “not enabled” mode. On chip trimming results in high output voltage accuracy (2%). Accuracy is kept over wide temperature range, line and load variation. The maximum input voltage is 40 V. The max output current is internally limited. Internal temperature protection disables the voltage regulator output.

The VND5E025LK-E is a double channel high-side driver designed for automotive applications. It features analog current sense and various protections such as power limitation for inrush current management, low standby current, 3.0V CMOS compatible inputs, optimized electromagnetic emissions and susceptibility, compliance with EU directive 2002/95/EC, and very low current sense leakage. The driver also offers diagnostic functions, proportional load current sense, high precision for wide currents range, current sense disable, off state open load detection, output short to VCC detection, overload and short to ground indication, thermal shutdown indication, and more. It is suitable for driving resistive, inductive, and capacitive loads, and can be used as an LED driver.

SPC564A74B4, SPC564A74L7, SPC564A80B4, SPC564A80L7 are a family of 32-bit MCUs built on the embedded Power Architecture®. The products feature a 150 MHz e200z4 Power Architecture® core, variable length instruction encoding (VLE), superscalar architecture with 2 execution units, high-performance memory organization, fail-safe protection, configurable interrupt controller, multiple serial channels, multiple modules and interfaces, and more.

The L99DZ70XP is a microcontroller driven multifunctional door actuator driver for automotive applications. Up to five DC motors and five grounded resistive loads can be driven. It features six full bridges, two half bridges, two high side drivers, and supports temperature warning and protection, openload detection, over-current protection, etc.

32-bit MCU family built on the Power Architecture® for automotive body electronics applications

This datasheet introduces the STA680 HD Radio™ baseband receiver production data. The receiver supports AM/FM hybrid and all-digital modes IBOC (in-band on-channel) digital audio broadcast signal decoding, as well as dual-channel HD 1.5 for background scanning and data services.

This data sheet provides detailed information on the 32-bit Power Architecture® based MCU SPC560P44L3, SPC560P44L5 SPC560P50L3, SPC560P50L5 and its features and functions

This is a production data sheet on a 32-bit Power Architecture® based MCU for automotive powertrain applications.