ON Semiconductor manuals, page 17
ON Semiconductor MC34071/2/4/A MC33071/2/4/A DATA SHEET
The MC33071/72/74, MC34071/72/74 series are single-chip operational amplifiers using high-quality bipolar fabrication technology and innovative design concepts.
ON Semiconductor MC14569B handbook
The MC14569B is a programmable divide-by-N dual 4-bit binary or BCD down counter constructed with MOS P-channel and N-channel enhancement mode devices (complementary MOS) in a monolithic structure.
ON Semiconductor NCP1117 NCV1117 handbook
NCP1117, NCV1117 1.0A Low-Dropout Positive Fixed and Adjustable Voltage Regulators
ON Semiconductor EMZ1DXV6T1 EMZ1DXV6T5 handbook
This document describes the features and characteristics of the EMZ1DXV6T1 and EMZ1DXV6T5 dual general purpose transistors. They are NPN/PNP complementary transistors designed for general purpose amplifier applications. The transistors are housed in the SOT-563 package, which is designed for low power surface mount applications.
ON Semiconductor TLV431A TLV431B handbook
The TLV431A/D series of low voltage precision adjustable shunt regulators are programmable over a wide voltage range of 1.24V to 16V. The TLV431A series features a guaranteed reference accuracy of ±1.0% at 25°C and ±2.0% over the entire industrial temperature range of −40°C to 85°C. For TLV431B series, the accuracy is even higher, it’s ±0.5% and ±1.0% respectively. These devices exhibit a sharp low current turn−on characteristic with a low dynamic impedance of 0.20 Ω over an operating current range of 100μA to 20mA. This combination of features makes this series an excellent replacement for zener diodes in numerous applications circuits that require a precise reference voltage. When combined with an optocoupler, the TLV431A/B can be used as an error amplifier for controlling the feedback loop in isolated low output voltage (3.0 V to 3.3 V) switching power supplies. These devices are available in economical TO−92−3 and micro size TSOP−5 and SOT−23−3 packages.
ON SEMICONDUCTOR NCP1402 Data Sheet
The NCP1402 is a 200mA, PFM step-up micropower switching regulator from Semiconductor Components Industries. It features an extremely low startup voltage (0.8V), high efficiency (85%), low operating current (30μA), high output voltage accuracy (±2.5%), low converter ripple (typical 30mV), and requires only three external components.
ON SEMICONDUCTOR MC14099B Data Sheet
MC14099B is an 8-bit addressable latch. Data is entered in serial form when the appropriate latch is addressed (via address pins A0, A1, A2) and write disable is in the low state. For the MC14099B the input is a unidirectional write only port. The data is presented in parallel at the output of the eight latches independently of the state of Write Disable, Write/Read or Chip Enable. A Master Reset capability is available on both parts.
ON Semiconductor MZP4729A Series handbook(2)
This document is the English version of the datasheet for MZP4729A series 3 Watt DO-41 Surmetic®30 Zener Voltage Regulators. This series of Zener diodes have superior electrical performance and can be used in various environments.
ON Semiconductor MZP4729A Series handbook(1)
This document describes a series of 3-watt Zener diodes with excellent operating characteristics and silicon-oxide passivated junctions. The product is protected in an axial-lead, transfer-molded plastic package and offers superior capabilities.
ON Semiconductor MZP4729A Series handbook
This is a complete series of 3 Watt Zener diodes with limits and excellent operating characteristics that reflect the superior capabilities of silicon–oxide passivated junctions. All this in an axial–lead, transfer–molded plastic package that offers protection in all common environmental conditions.
ON Semiconductor 74FST3400 handbook
The ON Semiconductor 74FST3400 is a 4-bit, 4-port bus exchange switch. The device is CMOS TTL compatible when operating between 4.0 and 5.5 Volts. The device exhibits extremely low RON and adds nearly zero propagation delay. The device adds no noise or ground bounce to the system.
ON Semiconductor LM285 LM385B handbook
This file introduces the characteristics of the LM285/LM385 series micropower two-terminal bandgap voltage regulator diodes. This series products are packaged in a low-cost TO-226 plastic case and are available with an operating current range of 10μA to 20mA, featuring exceptionally low dynamic impedance, low noise and stable operation over time and temperature. Tight voltage tolerances are achieved by on-chip trimming. The large dynamic operating range enables these devices to be used in applications with widely varying supplies with excellent regulation. Extremely low operating current make these devices ideal for micropower circuitry like portable instrumentation, regulators and other analog circuitry where extended battery life is required.
ON Semiconductor NTP10N40 NTB10N40 handbook
This document introduces N-Channel TO-220 and D2PAK packaged semiconductor devices designed for high voltage, high speed switching applications in power supplies, converters, power motor controls, and bridge circuits. It features higher current rating, lower RDS(on), lower capacitances, lower total gate charge, and tighter VSD specifications. Typical applications include switch mode power supplies, PWM motor controls, converters, and bridge circuits.
ON Semiconductor NTHD5903T1 handbook
This document describes the NTHD5903T1 chip, which features low RDS(on) for higher efficiency, logic level gate drive, and a miniature ChipFET surface mount package that saves board space. The chip is suitable for power management in portable and battery-powered products, such as cellular and cordless telephones and PCMCIA cards.
ON Semiconductor NTD20N03L27 handbook
NTD20N03L27 is an N-channel DPAK power MOSFET with a rated current of 20 amperes and a rated voltage of 30 volts. The device features low on-resistance (Rds(on)), single base, advanced technology. SPICE parameters are available. The diode is characterized for use in bridge circuits. IDSS and VDS(on) are specified at elevated temperatures. High avalanche energy is specified. ESD JEDAC rated HBM Class 1, MM Class A, CDM Class 0. Typical applications include power supplies, inductive loads, PWM motor controls and replacement for MTD20N03L in many applications.