Maxim manuals, page 55
MAXIM MAX4649 45 SPDT Analog Switch in SOT23-8handbook
The MAX4649 is a low on-resistance, single-pole double-throw (SPDT) analog switch from Texas Instruments. Its on-resistance is a maximum of 45 ohms and flat (7 ohms maximum) over the specified signal range. The MAX4649 can handle Rail-to-Rail® analog signals and conducts analog or digital signals equally well in either direction. This switch operates from a single +9V to +36V supply, or from ±4.5V to ±20V dual supplies. The primary application areas are in the switching and routing of signals in telecommunications and test equipment. The MAX4649 features a switch transition time of 130ns maximum at +25°C, and a guaranteed break-before-make switching time of 5ns. Off-leakage current is only 2nA maximum at +25°C. The MAX4649 is available in a tiny 8-pin SOT23 package.
MAXIM MAX4711/MAX4712/MAX4713 handbook
The MAX4711/MAX4712/MAX4713 are fault-protected, Rail-to-Rail®, low-voltage analog switches featuring low on-resistance and guaranteed on-resistance flatness over the specified signal range.
MAXIM MAX8814 Manual
The MAX8814 is an intelligent, stand-alone constant-current, constant-voltage (CCCV) thermally regulated linear charger designed for charging a single-cell lithium-ion (Li+) battery. The IC integrates the current- sense circuit, MOSFET pass element, thermal- regulation circuitry, and eliminates the reverse-blocking Schottky diode to create the simplest and smallest charging solution for handheld equipment.
MAXIM MAX4655 MAX4658 Manual
Maxim’s MAX4655–MAX4658 are medium-voltage CMOS analog switches with low on-resistance of 10Ω max, specifically designed to handle large switch cur- rents. With a switch capability of up to 400mA peak cur- rent and 300mA continuous current (MAX4655/ MAX4656), and up to 300mA peak current and 150mA continuous current (MAX4657/MAX4658), these parts can switch loads as low as 25Ω. They can replace reed relays with a million times the speed and virtually unlim- ited number of lifetime cycles. Normal power consump- tion is only 3mW, whether the switch is on or off. These parts are TTL/CMOS compatible and will switch any voltage within its power-supply range. These are SPST (single-pole/single-throw) switches. The MAX4655/MAX4657 are normally closed (NC), while the MAX4656/MAX4658 are normally open (NO). The difference between the MAX4655/MAX4656 and the MAX4657/MAX4658 is in the power dissipation of their packages. Refer to the Absolute Maximum Ratings and the Electrical Characteristics. The MAX4655–MAX4658 power-supply range is from ±4.5V to ±20V for dual-supply operation and +9V to +40V for single-supply operation. These switches can operate from any combination of supplies, within a 40V V+ to V- range. They conduct equally well in either direc- tion and can handle rail-to-rail analog signals. The off- leakage current is only 1nA max at TA = +25°C. They are available in 8-pin µMAX®, TDFN, and SO packages, with exposed paddle options for high-power application
MAXIM MAX4533 Manual
The MAX4533 is a quad, single-pole/double-throw (SPDT), fault-protected analog switch that is pin-compatible with the industry-standard MAX333 and MAX333A. It features fault-protected inputs and Rail-to-Rail® signal handling. The normally open (NO_ ) and normally closed (NC_ ) terminals are protected from overvoltage faults up to ±25V with power on and up to ±40V with power off. During a fault condition, NO_ and NC_ become high impedance with only nanoamperes of leakage current flowing to the source. In addition, the output (COM_) clamps to the appropriate polarity supply rail and provides up to ±10mA of load current. This ensures unambiguous rail-to-rail outputs when a fault occurs. The MAX4533 operates from dual ±4.5V to ±18V power supplies or a single +9V to +36V supply. All digital inputs have +0.8V and +2.4V logic thresholds, ensuring both TTL and CMOS logic compatibility when using ±15V supplies or a +12V supply. On-resistance is 175Ω max and is matched between switches to 10Ω max. The off- leakage current is only 0.5nA at TA = +25°C and 10nA at TA = +85°C. Applications include redundant/backup systems, portable instruments, test equipment, data-acquisition, communications systems, industrial and process control, and avionics systems.
MAXIM MAX4051/A MAX4052/A MAX4053/A handbook
The MAX4051/4052/4053 series are low-voltage CMOS analog integrated circuits configured as an 8-channel multiplexer (MAX4051), two 4-channel multiplexers (MAX4052) and three single-pole/double-throw (SPDT) switches (MAX4053). A-suffix parts are fully characterized for on-resistance match, on-resistance flatness, and low leakage. These CMOS devices can operate continuously with dual power supplies ranging from ±2.7 V to ±8 V or a single supply between +2.7 V and +16 V. Each switch can handle rail-to-rail analog signals. The off-leakage current is only 0.1 nA at +25°C or 5 nA at +85°C (MAX4051A/4052A/4053A). All digital inputs have 0.8 V to 2.4 V logic thresholds, ensuring TTL/CMOS-logic compatibility when using ±5 V or a single +5 V supply.
MAXIM MAX4659/4660 Manual
The MAX4659/MAX4660 are medium voltage CMOS analog switches with a low on-resistance and high switch current capability. They can replace reed relays with faster switching speed and longer lifetime cycles. These analog switches have low power consumption and can operate within a wide power-supply range.
MAXIM MAX4534/MAX4535 Manual
The MAX4534/MAX4535 are fault-protected multiplexers operating with ±4.5V to ±20V dual supplies or a +9V to +36V single supply. These multiplexers feature fault-protected inputs, rail- to-rail signal-handling capability, and overvoltage clamping at 150mV beyond the rails.
MAXIM MAX312L/MAX313/MAX314L Manual
The MAX312L/MAX313L/MAX314L analog switches have low on-resistance (up to 10Ω) and 1.5Ω on-resistance matching between channels. These switches are +3V logic compatible when powered from ±15V or +12V supplies. The switches conduct equally well in either direction and offer low leakage over temperature (2.5nA at +85°C). The MAX312L/MAX313L/MAX314L are quad, single-pole/single-throw (SPST) analog switches. The MAX312L is normally closed (NC), and the MAX313L is normally open (NO). The MAX314L has two normally closed switches and two normally open switches. All three devices operate from a single +4.5V to +36V supply or from dual ±4.5V to ±20V supplies and are available in 16-pin TSSOP, SO, and DIP packages.
MAXIM DG417L/DG418L/DG419L Manual
DG417L/DG418L/DG419L 35Ω, SPST/SPDT, +3V Logic-Compatible Analog Switches are precision CMOS analog switches from Maxim company, which features low on-resistance (RON = 35Ω), guaranteed RON matching between switches (3Ω max), and guaranteed RON flatness over the signal range (4Ω max).
MAXIM DG411F/DG412F/DG413F Manual
The DG411F/DG412F/DG413F are quad, single-pole/sin- gle-throw (SPST), fault-protected analog switches. They are pin compatible with the industry-standard nonpro- tected DG411/DG412/DG413. These new switches fea- ture fault-protected inputs and Rail-to-Rail signal- handling capability. All terminals are protected from overvoltage faults up to ±36V with power on and up to ±40V with power off. During a fault condition, the COM, NO, or NC terminal becomes an open circuit and only microamperes of leakage current flow from the source. On-resistance is 35Ω (max) and is matched between switches to 1.5Ω (max) at +25°C. The DG411F has four normally closed (NC) switches. The DG412F has four normally open (NO) switches. The DG413F has two NC and two NO switches. These CMOS switches operate with dual power supplies rang- ing from ±4.5V to ±20V or a single supply between +9V and +36V. All digital inputs have +0.8V and +2.4V logic thresholds, ensuring both TTL and CMOS logic com- patibility when using ±15V or a single +12V supply. For supply voltages of ±5V, +5V, and +3V, refer to the MAX4711/MAX4712/MAX4713 data sheet.
MAXIM MAX4708/MAX4709 Manual
The MAX4708/MAX4709 are 8-to-1 and dual 4-to-1 fault-protected multiplexers that are pin compatible with the industry-standard DG508/DG509. The MAX4708/MAX4709 are similar to the MAX4508/MAX4509, but these devices do not have clamp diodes to the supply rails on the switch outputs. These multiplexers feature fault-protected inputs, rail-to-rail signal-handling capability, and do not require power-supply sequencing. Both devices offer ±40V overvoltage protection with the supplies off, ±36V protection with the supplies on, and feature 400Ω (max) on-resistance with 15Ω (max) matching between channels. The MAX4708/MAX4709 operate with dual supplies of ±4.5V to ±20V or a single supply of +9V to +36V. All digital inputs have TTL logic-compatible thresholds, ensuring both TTL and CMOS logic compatibility when using a single +12V supply or dual ±15V supplies. For low-voltage applications requiring fault protection, refer to the MAX4711/MAX4712/MAX4713 data sheet. Applications include data-acquisition systems, industrial and process control, avionics, signal routing, redundancy/backup systems, ATE systems, and hot swap systems.
MAXIM MAX4747 MAX4750 handbook
The MAX4747-MAX4750 low-voltage quad single-pole single-throw (SPST)/dual single-pole/double-throw (SPDT) analog switches operate from a single +2V to +11V supply and handle rail-to-rail analog signals. These switches exhibit low leakage current (0.1nA) and consume less than 0.5nW (typ) of quiescent power, making them ideal for battery-powered applications.
MAXIM MAX4731/MAX4732/MAX4733 Manual
The MAX4731/MAX4732/MAX4733 are low-voltage, dual, single-pole/single-throw (SPST) analog switches that operate from a single +2V to +11V supply and handle rail-to-rail analog signals. These switches exhibit low leakage current (0.1nA) and consume less than 0.5nW (typ) of quiescent power, making them ideal for battery-powered applications. When powered from a +3V supply, these switches feature 50Ω (max) on-resistance (RON) with 3.5Ω (max) matching between channels, and 9Ω (max) flatness over the specified signal range. The MAX4731 has two normally open (NO) switches, the MAX4732 has two normally closed (NC) switches, and the MAX4733 has one NO and one NC switch. The MAX4731/MAX4732/MAX4733 are available in 9-bump chip-scale packages (UCSP™), along with 8-pin TDFN and 8-pin µMAX® packages. The tiny UCSP occupies a 1.52mm x 1.52mm area and significantly reduces the required PC board area.
MAXIM MAX4524L/MAX4525L Manual
The MAX4524L/MAX4525L are low-voltage, single-supply CMOS analog switches configured as a 4-channel multiplexer/demultiplexer (MAX4524L) and a double-pole/double-throw (DPDT) switch (MAX4525L). The MAX4524L/MAX4525L have an inhibit input to simultaneously open all switches. These devices operate from a single supply of +2V to +12V. They are optimized for operation with a +12V supply. The on-resistance is 100Ω with a +12V supply. Each switch can handle Rail-to-Rail analog signals. Off-leakage current measures only 2nA at +25°C. All digital inputs have 0.8V to 2.0V logic thresholds to ensure TTL/CMOS-logic compatibility when using a +12V supply. Applications include audio and video signal routing, data-acquisition systems, communications circuits, and automotive DSL modems. Features include +3V Logic-Compatible Inputs (VIH = 2.0V, VIL = 0.8V), +2V to +12V Supply Operation, 100Ω On-Resistance with +12V Supply, Guaranteed 10Ω On-Resistance Match at +12V, Guaranteed 2nA Maximum Off-Leakage at +12V, TTL/CMOS-Logic Compatible, and Tiny 10-Pin TDFN (3mm × 3mm) and 10-Pin µMAX Packages.