Maxim Manuals - Page 58

Maxim manuals, page 58

• MAXIM MAX391/MAX392/MAX393 Precision Quad SPST Analog Switches handbook

  The MAX391/MAX392/MAX393 are precision, quad, single-pole/single-throw (SPST) analog switches designed to operate at +3V, +5V, or ±5V. The MAX391 has four normally closed (NC) switches, and the MAX392 has four normally open (NO) switches. The MAX393 has two NO and two NC switches. All three devices offer low leakage (100pA max) and fast switching speeds (tON ≤ 130ns, tOFF ≤ 75ns). Power consumption is just 1µW—ideal for battery-operated equipment. All devices operate from a single +3V to +15V supply or from dual ±3.0V to ±8V supplies.

• MAXIM MAX4624/MAX4625 1 Low-Voltage Single-Supply SPDT Analog Switches handbook

  The MAX4624/MAX4625 are low-on-resistance, low-voltage single-pole/double-throw (SPDT) analog switches that operate from a single +1.8V to +5.5V supply. The MAX4624 has break-before-make switching; the MAX4625 has make-before-break switching. These devices also have fast switching speeds (tON = 50ns max, tOFF = 50ns max). When powered from a +5V supply, the MAX4624/MAX4625 offer 1Ω max on-resistance (RON), with 0.12Ω max RON matching and flatness. The digital logic inputs are TTL compatible when using a single +5V supply. These switches also feature overcurrent protec-tion to prevent damage from short circuits and exces-sive loads. The MAX4624/MAX4625 are pin compatible with the MAX4544 and are available in space-saving standard 6-pin SOT23 packages, as well as the 1.0mm high Thin SOT package.

• MAXIM MAX4626/MAX4627/MAX4628 0.5 Low-Voltage Single-Supply SPST Analog Switches handbook

  The MAX4626/MAX4627/MAX4628 are low-on-resistance, low-voltage, single-pole/single-throw (SPST) analog switches that operate from a +1.8V to +5.5V sin- gle supply.

• MAXIM MAX4641/MAX4642/MAX4643 High-Speed Low-Voltage 4 Dual SPST CMOS Analog Switches handbook

  The MAX4641/MAX4642/MAX4643 are monolithic, dual, single-pole/single-throw (SPST) switches that can operate from a single supply ranging from +1.8V to +5.5V. The MAX4641/MAX4642/MAX4643 provide low 4Ω on-resistance (RON), 0.6Ω RON matching between channels, and 1Ω RON flatness over the entire analog signal range. These devices offer fast switching times of less than 20ns while consuming less than 0.01µW of quiescent power. The MAX4641 has two normally open (NO) switches, and the MAX4642 has two normally closed (NC) switches. The MAX4643 has one NO switch and one NC switch. All three devices have low 0.35nA leakage currents over the entire temperature range. The MAX4641/ MAX4642/MAX4643 are available in small 8-pin µMAX and 8-pin QFN packages.

• MAXIM MAX4674 3V/5V 4 Wideband Quad 2:1 Analog Multiplexer handbook

  The MAX4674 is a low-voltage CMOS analog switch containing four 2:1 multiplexers/demultiplexer. When powered from a single +5V supply, it features a low 4Ω max on-resistance (RON), 0.4Ω max RON matching between channels, and 0.8Ω RON flatness over the entire signal range. Off-leakage current is only 0.5nA max at +25°C. The MAX4674 features fast turn-on (tON) and turn-off (tOFF) times of 18ns and 6ns, respectively, and is available in QFN, QSOP, TSSOP, and SO packages. This low-voltage multiplexer operates with a +1.8V to +5.5V single supply. All digital inputs have +0.8V and +2.4V logic thresholds, ensuring TTL/CMOS-logic compatibility with +5V operation.

• MAXIM MAX4644 High-Speed Low-Voltage 4Ω SPDT CMOS Analog Switch handbook

  The MAX4644 is a single-pole/double-throw (SPDT) switch that operates from a single supply ranging from +1.8V to +5.5V. It provides low 4Ω on-resistance (RON) as well as 1Ω RON flatness over the entire analog-signal range. The MAX4644 offers fast switching times of less than 20ns while ensuring break-before-make operation. It typically consumes only 0.01μW of quiescent power, making it suitable for use in low-power, portable applications. The MAX4644’s features include low leakage currents over the entire temperature range, TTL/CMOS-compatible digital logic, and excellent AC characteristics. It is packaged in either a small 8-pin μMAX® or a tiny 6-pin SOT23.

• MAXIM MAX4634 Fast Low-Voltage 4Ω 4-Channel CMOS Analog Multiplexerhandbook

  The MAX4634 is a low-voltage multiple switch device launched by MAXIM company, which has the characteristics of low resistance, low leakage current and fast switching. It is suitable for battery-powered equipment, audio and video signal routing, low-voltage data acquisition systems, sampling and holding circuits, and communication circuits.

• MAXIM MAX4635/MAX4636 Fast Low-Voltage Dual 4 SPDT CMOS Analog Switches handbook

  The MAX4635/MAX4636 are fast, dual 4Ω single-pole/double-throw (SPDT) analog switches that operate with supply voltages from +1.8V to +5.5V. High switching speeds, 1Ω on-resistance flatness, and low power consumption make these devices ideal for audio/video, communications, and battery-operated devices. Containing two independently controllable SPDT switches in 10-pin µMAX and 10-pin 3mm x 3mm thin QFN packages, the MAX4635/MAX4636 use little board space, and have low power consumption ensuring minimal impact on your power budget. The analog signal range extends to the supply rails. The MAX4635 has inverted logic compared to the MAX4636.

• MAXIM MAX4677/MAX4678/MAX4679 2 Quad SPST CMOS Analog Switches handbook

  MAX4677/MAX4678/MAX4679 are quad analog switches with on-resistance of 1.6 ohms, operating from dual ±5V supply. They feature low distortion and reliability.

• MAXIM MAX4645/MAX4646 Manual

  The MAX4645/MAX4646 are single-pole, single-throw (SPST) analog switches with a typical on-resistance (RON) of 2.5Ω and a flatness of 0.4Ω. The switches can handle Rail-to-Rail analog signals and have low power requirements, small board space, and high reliability compared to mechanical relays. They are ideal for low-distortion applications and are the preferred solution in automated test equipment or applications where current switching is required. They operate from a +1.8V to +5V supply, making them suitable for battery-powered applications. The switches have fast switching speeds and low leakage currents. The MAX4645 is a normally open (NO) switch, and the MAX4646 is a normally closed (NC) switch.

• MAXIM MAX4675/MAX4676 Manual

  The MAX4675/MAX4676 single analog switches have 3Ω (max) on-resistance (RON) and 0.7Ω flatness when operating from dual ±5V supplies. These switches can handle Rail-to-Rail® analog signals. Off-leakage current is 0.1nA at TA = +25°C. The MAX4675/MAX4676 are ideal in low-distortion applications and are the preferred solution over mechanical relays in automated test equipment or applications where current switching is required. They are more reliable than mechanical relays, have low power requirements (<1µA), and are available in a space-saving 6-pin SOT23 package. The MAX4675 has a single normally open (NO) switch, and the MAX4676 has a single normally closed (NC) switch. The MAX4675/MAX4676 operate from either a single +2.7V to +5.5V or dual ±2.7V to ±5.5V supplies, making them ideal for use in digital card applications and single-ended 75Ω systems.

• MAXIM MAX4638/MAX4639 Manual

  MAX4638/MAX4639 are single 8:1 and dual 4:1 CMOS analog multiplexers/demultiplexers (muxes/demuxes). Each mux operates from a single +1.8V to +5V supply or dual ±2.5V supplies. These devices fea- ture 3.5Ω on-resistance (RON) when powered with a single +5V supply and have -75dB off-isolation and -85dB crosstalk from the output to each off channel. The switching times are 18ns tON and 7ns tOFF. They feature a -3dB 85MHz bandwidth and a guaranteed 0.25nA leakage current at +25°C. A +1.8V to +5.5V operating range makes the MAX4638/ MAX4639 ideal for battery-powered, portable instru- ments. All channels guarantee break-before-make switching. These parts feature bidirectional operation and can handle Rail-to-Rail® analog signals. All control inputs are TTL/CMOS-logic compatible. Decoding is in standard BCD format, and an enable input is provided to simplify cascading of devices. These devices are avail- able in small 16-pin thin QFN, TSSOP, and SO packages, as well as a 20-pin thin QFN package.

• Maxim Low-Voltage Single-Supply SPDT Analog Switch in SC70 MAX4599 handbook

  The MAX4599 is a single-channel low-voltage switch produced by Maxim. It operates at a supply voltage of +2.0V to +5.5V, has a switch resistance of 60 ohms, and a switching time of 30ns. It comes in SC70, µDFN, and SOT23 packages.

• MAXIM MAX4651/MAX4652/MAX4653 Manual

  The MAX4651/MAX4652/MAX4653 quad analog switches feature 4Ω max on-resistance (RON) when operating from a single +5V supply. RON is matched between switches to 0.2Ω (max) and is flat (0.8Ω max) over the specified signal range. Each switch can handle Rail-to-Rail® analog signals. Off-leakage current is 0.1nA at +25°C. These switches are ideal in low-distortion applications and are the preferred solution over mechanical relays in automated test equipment or applications where current switching is required. They have low power requirements, require less board space, and are more reliable than mechanical relays. The MAX4651/MAX4652/MAX4653 operate from a single +1.8V to +5.5V supply, making them ideal for use in battery-powered applications. The MAX4651 has four normally closed (NC) switches, the MAX4652 has four normally open (NO) switches, and the MAX4653 has two NO and two NC switches.

• MAXIM MAX4594 MAX4597 Manual

  MAX4594-MAX4597 Low-Voltage, Single-Supply, 10 Ohm SPST CMOS Analog Switches

Maxim manuals by category