Maxim manuals, page 56
MAXIM MAX4581L/MAX4582L/MAX4583L Manual
The MAX4581L/MAX4582L/MAX4583L are low-voltage, CMOS analog ICs configured as an 8-channel multiplexer (MAX4581L), two 4-channel multiplexers (MAX4582L), and three single-pole/double-throw (SPDT) switches (MAX4583L). These CMOS devices operate with a +2V to +12V single supply. Each switch can handle rail-to-rail analog signals. Off-leakage current is only 2nA at +25°C. All digital inputs have 0.8V to 2.0V logic thresholds to ensure TTL/CMOS-logic compatibility when using a +12V supply. Applications: Audio and Video Signal Routing, Data-Acquisition Systems, Communications Circuits, Automotive DSL Modem. Features: +3V Logic-Compatible Inputs (VIH = 2.0V, VIL = 0.8V); Guaranteed On-Resistance: 80Ω with +12V Supply; Guaranteed 4Ω On-Resistance Match Between Channels; Guaranteed Low Off-Leakage Current: 2nA at +25°C; Guaranteed Low On-Leakage Current: 2nA at +25°C; +2V to +12V Supply Operation; TTL/CMOS-Logic Compatible; Low Crosstalk: -96dB (MAX4582L); High Off-Isolation: -90dB; Tiny 4mm × 4mm Thin QFN Package; Pin Compatible with Industry-Standard 74HC4051/74HC4052/74HC4053 and MAX4051/MAX4052/MAX4053.
maxim MAX4890/MAX4891/MAX4892 Manual(1)
The MAX4890/MAX4891/MAX4892 high-speed analog switches meet the needs of 10/100/1000 Base-T applications.
maxim MAX4887 Manual(1)
The MAX4887 is a high-performance RGB video switch that supports 1:2 and 2:1 mode switching, has low on-resistance and low on-capacitance, supports 3V/5V single-supply power, and can be applied to notebooks, servers and routers, hubs, PC/HDTV monitors and other devices
maxim MAX4885 Manual(1)
MAX4885 is a 1:2 or 2:1 multiplexer for VGA signals from TI. It integrates high-bandwidth analog switches and level-translating buffers, has a low-noise charge pump and internal capacitors, and can provide switching for RGB, DDC and horizontal and vertical synchronization signals. In the 1:2 multiplexer mode, HSYNC/VSYNC inputs feature level-shifting buffers to support low-voltage CMOS or standard TTL-compatible graphics controllers. In the 2:1 multiplexer mode, the output buffers for the HSYNC/VSYNC inputs are disabled, allowing bidirectional signaling. In both modes, DDC signals are voltage-clamped to an external voltage to provide level translation and protection. MAX4885 has a 5µA shutdown mode and is ESD protected to ±8kV Human Body Model (HBM) on externally routed pins. MAX4885 is specified over the extended (-40°C to +85°C) temperature range and is available in the 32-pin, 5mm x 5mm TQFN package.
MAXIM MAX4890E/MAX4892E handbook
MAX4890E/MAX4892E has high ESD protection and wide bandwidth, suitable for Ethernet, LVDS and LVPECL switching applications.
maxim MAX4899E/MAX4899AE Manual(1)
MAX4899E/MAX4899AE are dual 3:1 and 4:1 analog switches, operating voltage range is 2.7V-3.6V, support USB2.0 high speed, low speed and full speed signal, support -15kV ESD protection, suitable for mobile phones, digital cameras, PDAs, digital cameras, MPEG-4 players, portable GPS and other devices
maxim MAX4886 Manual(1)
The MAX4886 is a high-speed analog switch from ADI that is ideal for HDMI/DVI switching applications. It contains four differential pairs of 1:2 or 2:1 switches for RGB and clocking signals. The MAX4886 can connect one monitor to one of two digital video signals, or one HDMI/DVI source to one of two loads (sinks). The MAX4886 is based on an nFET architecture with internal charge pump for gate overdrive. This advanced architecture results in an extremely low capacitance and on-resistance needed for the excellent return loss requirements for digital switching. An efficient internal charge-pump design offers very low quiescent current for power-sensitive notebook designs. The MAX4886 features 8Ω (typ) on-resistance and 2.5pF on-capacitance switches for routing RGB and CLK video signals. The MAX4886 is a high-frequency companion device to the MAX4929. These two devices combined perform the full 2:1 HDMI/DVI switching function. The MAX4886 is available in a space-saving, 42-pin, 3.5mm x 9.0mm TQFN package and operates over the extended -40°C to +85°C temperature range.
MAXIM MAX1213 Manual
The MAX1213 is a monolithic, 12-bit, 170Msps analog-to-digital converter (ADC) optimized for outstanding dynamic performance at high-IF frequencies up to 300MHz. The product operates with conversion rates up to 170Msps while consuming only 788mW. At 170Msps and an input frequency up to 250MHz, the MAX1213 achieves a spurious-free dynamic range (SFDR) of 72.9dBc. Its excellent signal-to-noise ratio (SNR) of 65.8dB at 10MHz remains flat (within 2dB) for input tones up to 250MHz. This ADC yields an excellent low-noise floor of -68dBFS, which makes it ideal for wideband applications such as cable head-end receivers and power-amplifier predistortion in cellular base-station transceivers.
MAXIM MAX4929E handbook
The MAX4929E low-frequency 2:1 switch is ideal for HDMI™/DVI™ switching applications. The device features a voltage clamp function to protect low-voltage systems at the output. The MAX4929E operates with a single 5V supply or dual or triple supplies. The MAX4929E provides clamping and voltage translation without additional components. All external inputs/outputs are electrostatic-discharge (ESD)-protected to ±6kV Human Body Model (HBM). The MAX4929E is available in 20-pin QSOP and 20-pin, 4mm x 4mm, TQFN packages. The device is specified for the extended -40°C to +85°C operating temperature range.
MAXIM MAX4800A/MAX4802A handbook
The MAX4800A/MAX4802A provide high-voltage switching on eight channels for ultrasonic imaging and printer applications. These devices utilize BCDMOS process technology to provide eight high-voltage low-charge-injection SPST switches, controlled by a 20MHz serial interface. Data is clocked into an internal 8-bit shift register and retained by a programmable latch with enable and clear inputs. A power-on reset function ensures that all switches are open on power-up. These devices operate with a wide range of high-voltage supplies including: VPP/VNN = +100V/-100V, +185V/-15V, and +40V/-160V. The digital interface operates from a separate VDD supply from +2.7V to +6V. Digital inputs DIN, CLK, LE, and CLR are +6V tolerant, independent of the VDD supply voltage. The MAX4802A provides integrated 35kΩ bleed resistors on each switch terminal to discharge capacitive loads. These devices are drop-in replacements for the Supertex HV2203 and HV2303. They are available in the 48-pin LQFP, 26-bump CSBGA, and 28-pin PLCC packages. All devices are specified for the commercial 0°C to +70°C temperature range.
MAXIM MAX14752/14753 Manual
The MAX14752/MAX14753 are 8-Channel/Dual 4-Channel 72V Analog Multiplexers
MAXIM MAX4885E handbook
MAX4885E is a 1:2 VGA switch launched by Maxim, with ±15kV HBM ESD protection, 1GHz bandwidth, low 5Ω (typical) On-Resistance (R, G, B signals), low 6pF (typical) On-Capacitance (R, G, B signals), low R, G, B Skew -50ps (typical)
MAXIM MAX4936 MAX4939 handbook
The MAX4936–MAX4939 are octal, high-voltage, transmit/receive (T/R) switches. The T/R switches are based on a diode bridge topology, and the amount of current in the diode bridges can be programmed through an SPIK interface. All devices feature a latch-clear input to asynchronously turn off all T/R switches and put the device into a low-power shutdown mode. The MAX4936/MAX4938 include the T/R switch and grass-clipping diodes, performing both transmit and receive operations. The MAX4937/MAX4939 include just the T/R switch and perform the receive operation only. The MAX4936/MAX4938 transmit path is low impedance during high-voltage transmit and high impedance during low-voltage receive, providing isolation between transmit and receive circuitry. The high-voltage transmit path is high bandwidth, low distortion, and low jitter. The receive path for all devices is low impedance during low-voltage receive and high impedance during high-voltage transmit, providing protection to the receive circuitry. The low-voltage receive path is high bandwidth, low noise, low distortion, and low jitter.
MAXIM MAX14756/MAX14757/MAX14758 handbook
The MAX14756/MAX14757/MAX14758 are analog switches with a low on-resistance of 10I (max) that conduct equally well in both directions. They operate with a single +10V to +70V supply in unipolar applications or Q35V dual supplies in bipolar applications. These switches have 5I (typ) on-resistances and low on-leakage currents of 0.01nA (typ). The devices are suitable for a multitude of analog signal routing and switching applications.
MAXIM MAX14950A handbook
The MAX14950A is a single-lane PCIe equalizer/redriver from Maxim that provides programmable input equalization for improving PCI Express® (PCIe) signal integrity. It features innovative design, single +3.3V supply operation, increased design flexibility, optimized for PCIe Gen III (8GT/s) and Gen II (5GT/s) signals, high level of integration and very low latency.