Linear Technology manuals, page 6
LINEAR TECHNOLOGY OP-270/OP-470 handbook
LINEAR LTC1293/LTC1294/LTC1296 Data Sheet
The LTC1293/4/6 is a family of data acquisition systems which contain a serial I/O successive approximation A/D converter. It uses LTCMOS TM switched capacitor technology to perform either 12-bit unipolar, or 11-bit plus sign bipolar A/D conversions. The input multiplexer can be configured for either single ended or differential inputs (or combinations thereof). An on-chip sample and hold is included for all single ended input channels. When the LTC1293/4/6 is idle it can be powered down in applications where low power consumption is desired. The LTC1296 includes a System Shutdown Output pin which can be used to power down external circuitry, such as signal conditioning circuitry prior to the input mux. The serial I/O is designed to communicate without external hardware to most MPU serial ports and all MPU parallel I/O ports allowing up to eight channels of data to be transmitted over as few as three wires.
LINEAR LTC2435/LTC2435-1 handbook
The LTC ®2435/2435-1 are 2.7V to 5.5V micropower 20-bit differential ∆Σ analog to digital converters with integrated oscillator, 3ppm INL and 0.8ppm RMS noise. They use delta-sigma technology and provide single cycle settling time for multiplexed applications. Through a single pin, the LTC2435 can be configured for better than 110dB input differential mode rejection at 50Hz or 60Hz ±2%, or it can be driven by an external oscillator for a user defined rejection frequency. The LTC2435-1 can be con- figured for better than 87dB input differential mode rejec- tion over the range of 49Hz to 61.2Hz (50Hz and 60Hz ±2% simultaneously). The internal oscillator requires no external frequency setting components. The converters accept any external differential reference voltage from 0.1V to VCC for flexible ratiometric and remote sensing measurement configurations. The full- scale differential input range is from –0.5VREF to 0VREF.
LINEAR LTC1983-3/LTC1983-5 handbook
The LTC1983-3/LTC1983-5 are switching power supplies that can produce negative voltage outputs with a maximum output current of 100mA.
LINEAR LTC1591/LTC1597 handbook
The LTC1591/LTC1597 are pin compatible, parallel input 14-bit and 16-bit multiplying current output DACs that operate from a single 5V supply. INL and DNL are accurate to 1LSB over the industrial temperature range in both 2- and 4- quadrant multiplying modes. True 16-bit 4-quadrant multiplication is achieved with on-chip 4-quadrant multiplication resistors. These DACs include an internal deglitcher circuit that reduces the glitch impulse to less than 2nV-s (typ). The asynchronous CLR pin resets the LTC1591/LTC1597 to zero scale and LTC1591-1/LTC1597-1 to midscale. The LTC1591/LTC1597 are available in 28-pin SSOP and PDIP packages and are specified over the industrial temperature range. For serial interface 16-bit current output DACs refer to the LTC1595/LTC1596 data sheet.
LINEAR LTC1258-3/LTC1258-4.1 handbook
LTC1258-3/LTC1258-4.1 are micropower bandgap references that combine high accuracy and low drift with very low supply current and small package size. The combination of ultralow quiescent current and low dropout voltage of only 200mV max makes them ideal for battery-powered equipment. These references uses curvature compensation to obtain low temperature coefficient and trimmed thin-film resistors to achieve high output accuracy. These references can supply up to 10mA and sink up to 2mA, making them ideal for precision regulator applications.
LINEAR LTC1096/LTC1096L LTC1098/LTC1098L handbook
This datasheet provides detailed information on the LTC1096/LTC1096L/LTC1098/LTC1098L micropower sampling 8-bit serial I/O A/D converters, including: 80µA maximum supply current, 1nA typical supply current in shutdown state, 8-pin SO plastic package, 5V operation, 3V operation, sample and hold, 16µs conversion time, 33kHz sample rate, ±0.5LSB total unadjusted error over temperature, direct 3-wire interface to most MPU serial ports and all MPU parallel I/O ports
LINEAR LTC1068 Series handbook
LTC1068 Series Clock-Tunable Quad Second Order Filter Building Blocks
LINEAR LT6233/LT6233-10/LT6234/LT6235 Data Sheet
LINEAR LT6200/LT6200-5 handbook
LT6200/LT6201 are single and dual ultralow noise, rail-to-rail input and output unity gain stable op amps that feature 0.95nV/√Hz noise voltage. These amplifiers combine very low noise with a 165MHz gain bandwidth, 50V/µs slew rate and are optimized for low voltage signal conditioning systems.
LINEAR LF412A/OP-215 handbook
LINEAR LTC1345 Data Sheet
The LTC1345 is a single chip transceiver that provides the differential clock and data signals for a V.35 interface from a single 5V supply. It features software selectable DTE or DCE configuration, ESD protection, and short-circuit protection.
LINEAR LT1351 Data Sheet
LINEAR LT1057 Data Sheet
LINEAR LTC2446/LTC2447 handbook
The LTC2446/LTC2447 are 24-bit high-speed 8-channel ∆Σ ADCs with selectable multiple reference inputs. They are suitable for applications such as flow, weight scales, pressure, direct temperature measurement, gas chromatography, etc.