Linear Technology manuals, page 4
LINEAR LT3010/LT3010-5 handbook
The LT3010/LT3010-5 is a low dropout linear regulator with a wide input voltage range of 3V to 80V. It features low quiescent current, low dropout voltage, and stability. The LT3010-5 has a fixed output voltage of 5V, while the LT3010 can adjust the output voltage from 1.275V to 60V. The regulator is equipped with various protection functions, including reverse-battery protection, current limiting, and thermal limiting.
LINEAR TECHNOLOGY LT1945 handbook
The LT1945 is a dual micropower DC/DC converter from Linear Technology Corporation. It features a low quiescent current (20µA), high efficiency (90%+) and low standby current (<1µA). It is suitable for various portable applications.
LINEAR LTC1863/LTC1867 handbook
The LTC1863/LTC1867 are 8-channel 12-/16-bit A/D converters with serial I/O and an internal reference. They are suitable for industrial process control, high-speed data acquisition, battery-operated systems, multiplexed data acquisition systems, imaging systems, and more. They have a sample rate of 200ksps, 16-bit no missing codes, ±2LSB max INL, an 8-channel multiplexer with single-ended or differential inputs and unipolar or bipolar conversion modes. They use SPI/MICROWIRE TM serial I/O, have a signal-to-noise ratio of 89dB, support single 5V operation, have an on-chip or external reference, low power consumption, and come in a 16-pin narrow SSOP package.
LINEAR LM10 handbook
LINEAR LT1510/LT1510-5 handbook
LT1510/LT1510-5 is a simple and efficient solution for fast-charging modern rechargeable batteries including lithium-ion (Li-Ion), nickel-metal-hydride (NiMH)*, and nickel-cadmium (NiCd)* that require constant-current and/or constant-voltage charging. It features an internal switch capable of delivering 1.5A DC current (2A peak current). The charging current programming is simplified with a 0.1Ω onboard current sense resistor, requiring only one resistor or a programming current from a DAC to set the full charging current (1.5A) within 5% accuracy. With 0.5% reference voltage accuracy, the LT1510 meets the critical constant-voltage charging requirement for lithium cells. It can charge batteries ranging from 2V to 20V, and does not require ground sensing of current, allowing the battery's negative terminal to be tied directly to ground. The chip operates with a saturating switch running at 200kHz (500kHz for LT1510-5), providing high charging efficiency and small inductor size. A blocking diode is not needed between the chip and the battery as the chip goes into sleep mode and drains only 3µA when the wall adaptor is unplugged. Soft start and shutdown features are also included.
LINEAR TECHNOLOGY LM101A/LM301A/LM107/LM307 handbook
LINEAR LTC3406 LTC3406-1.5/LTC3406-1.8 Data Sheet
The LTC3406 is a high efficiency synchronous buck regulator that uses a constant frequency, current mode architecture. The supply current during operation is only 20µA and drops to ≤1µA in shutdown. The input voltage range is 2.5V to 5.5V and the output current is 600mA.
LINEAR SYSTEMS J500 SERIES
The document describes the features and characteristics of the Siliconix J500 series products, including wide current range, no biasing required, maximum operating temperature, etc.
LINEAR SYSTEMS SD5000/5001/5400/5401 QUAD N-CHANNEL LATERAL DMOS SWITCH ZENER PROTECTED
The SD5000/5400 series of monolithic switches features four individual double-diffused enhancement-mode MOSFETs built on a common substrate. These bidirectional devices provide low on-resistance and low interelectrode capacitances to minimize insertion loss and crosstalk. Built on Siliconix’ proprietary DMOS process, the SD5000/5400 series utilizes lateral construction to achieve low capacitance and ultra-fast switching speeds. For manufacturing reliability, these devices feature poly-silicon gates protected by Zener diodes.
LINEAR LTC1391 Data Sheet
The LTC1391 is a high performance CMOS 8-to-1 analog multiplexer. It features a serial digital interface that allows several LTC1391s to be daisy-chained together, increasing the number of MUX channels available using a single digital port. The LTC1391 features a typical RON of 45Ω, a typical switch leakage of 50pA and guaranteed break-before-make operation. Charge injection is ±10pC maximum. All digital inputs are TTL and CMOS compatible when operated from single or dual supplies. The inputs can withstand 100mA fault current. The LTC1391 is available in 16-pin PDIP, SSOP and narrow SO packages. For applications requiring 2-way serial data transmission, see the LTC1390 data sheet.
LINEAR LTC1283 Data Sheet
LINEAR LTC2238/LTC2237/LTC2236 handbook
The LTC ®2238/LTC2237/LTC2236 are 10-bit 65Msps/ 40Msps/25Msps, low power 3V A/D converters designed for digitizing high frequency, wide dynamic range signals.
LINEAR LTC1477/LTC1478 handbook
LINEAR LTC1422 handbook
The LTC1422 is a hot swap controller from LTC that allows the board to be safely inserted and removed from a live backplane. It has a programmable delay system reset output, a programmable electronic circuit breaker, a user-programmable supply voltage power-up rate, a high side driver for an external N-channel FET, controls supply voltages from 2.7V to 12V, undervoltage lockout and a soft reset input.
LINEAR LT1797 10MHz Rail-to-Rail Input Output Op Amp in SOT-23 handbook
The LT1797 is a unity-gain stable 10MHz op amp available in the small SOT-23 package that operates on all single and split supplies with a total voltage of 2.7V to 12V.