intersil Manuals

The X9438 is a monolithic CMOS IC that incorporates two operational amplifiers and two nonvolatile digitally controlled potentiometers. The amplifiers are CMOS differential input voltage operational amplifiers with near rail-to-rail outputs. The digitally controlled potentiometers consist of a series string of 63 polycrystalline resistors that behave as standard integrated circuit resistors.

EL5102, EL5103, EL5202, EL5203, EL5302 400MHz Enhanced Voltage Feedback Amplifiers

EL5224, EL5324, EL5424 12MHz Rail-to-Rail Buffers + 100mA VCOM Amplifier is a series of products including 8, 10, 12 low power buffers and one 100mA high power output amplifier, which are used for buffering column driver reference voltages in TFT-LCD applications as well as generation of the VCOM supply.

The EL7556D is an adjustable synchronous DC:DC switching regulator optimized for a 5V input and 1.0V-3.8V output. By combining integrated NMOS power FETS with a fused-lead package, the EL7556D can supply up to 6A continuous output current without the use of external power devices or discrete heat sinks, thereby minimizing design effort and overall system cost. On-chip resistorless current sensing is used to achieve stable, highly efficient, current-mode control. The EL7556D also incorporates the VCC2DET function to directly interface with the Intel P54 and P55 microprocessors. Depending on the state of VCC2DET, the output voltage is internally preset to 3.5V or a user-adjustable voltage using two external resistors. In both internal and external feedback modes the active-high PWRGD output indicates when the regulator output is within ±10% of the programmed voltage. An on- board sensor monitors die temperature (OT) for over- temperature conditions and can be connected directly to OUTEN to provide automatic thermal shutdown. Adjustable oscillator frequency and slope compensation allow added flexibility in overall system design. The EL7556D is available in a 28-pin SO package and is specified for operation over the full -40°C to +85°C temperature range.

FSYC163D, FSYC163R are a series of radiation hardened MOSFETs designed specifically for commercial and military space applications.

The HA-5137 operational amplifier features an unparalleled combination of precision DC and wideband high speed characteristics. Utilizing the Intersil Dielectric Isolation technology and advanced processing techniques, this unique design unites low noise precision instrumentation performance with high speed (20V/µs) wideband capability. This amplifier’s impressive list of features include low VOS (10µV), wide gain bandwidth (63MHz), high open loop gain (1800V/mV), and high CMRR (126dB). Additionally, this flexible device operates over a wide supply range (±5V to ±20V) while consuming only 140mW of power. Using the HA-5137 allows designers to minimize errors while maximizing speed and bandwidth in applications requiring gains greater than five. This device is ideally suited for low level transducer signal amplifier circuits. Other applications which can utilize the HA-5137’s qualities include instrumentation amplifiers, pulse or RF amplifiers, audio preamplifiers, and signal conditioning circuits. This device can easily be used as a design enhancement by directly replacing the 725, OP25, OP06, OP07, OP27 and OP37 where gains are greater than five.

HD-15531/883 is a Manchester Encoder-Decoder chip produced by Intersil, which supports MIL-STD-1553, and supports 1.25Mbit/s and 2.5Mbit/s data rates, supports data lengths from 2 to 28 bits, and has low power consumption.

This is a HM-6617/883 2K x 8 CMOS PROM datasheet

The HS-4424RH and HS-4424BRH are non-inverting, dual, monolithic high-speed MOSFET drivers designed to convert TTL level signals into high current outputs at voltages up to 18V.

The ICL7106 and ICL7107 are high performance, low power, 31/2 digit A/D converters. They combine high accuracy, versatility, and true economy. Features include auto-zero, low zero drift, low input bias current, and low rollover error. They are useful in all systems and provide an uncommon advantage when measuring load cells, strain gauges, and other bridge type transducers. Single power supply operation enables the construction of a high performance panel meter with minimal additional components.

ISL5120, ISL5121, ISL5122, ISL5123 are a series of low-voltage, single-supply, dual SPST and SPDT analog switches from Intersil, suitable for battery powered equipment such as mobile phones.

ISL14010, ISL14017 are low jitter clock generators from Intersil for consumer applications such as set-top box. It can accept 30MHz signal from crystal or external source and is specified to operate with a nominal 3.3V supply. It is offered in 16 Ld QFN package.

ISL6590 is an Intersil multi-phase PWM controller for core voltage regulation. The controller provides high bandwidth, optimal control frequency response, noise immunity and active transient response control algorithms. The design is fully scalable to control up to six phases, each featuring the Intersil ISL6580 intelligent power stage. The user can configure and monitor the power system via the Asynchronous Serial Interface (ASI). The ISL6590 controller flexibility can be extended with the addition of an external EEPROM for updating key circuit operating parameters in the control loop and overall system design. The digital architecture reduces the design time for engineers with the use of our software. The software allows the designer the freedom to choose output stage components and still achieve optimized system performance. The ISL6590 digital controller communicates with the ISL6580 integrated power stage via serial bus.

The ISL6308 is a three-phase PWM control IC with integrated MOSFET drivers. It is suitable for high current low voltage point-of-load converters, embedded applications, and other general purpose low voltage medium to high current applications. The integration of power MOSFET drivers into the controller IC allows for a cost and space saving power management solution.