ANALOG Manuals

The AD8591/AD8592/AD8594 are single-supply, rail-to-rail input/output operational amplifiers with shutdown.

The AD8014 is a low power, high performance 400 MHz amplifier. It features low cost, high speed, low noise, low distortion, and is suitable for applications such as photo-diode preamps, cameras, handheld devices, etc.

The AD8017 is a low cost, dual high speed amplifier capable of driving low distortion signals to within 1.0 V of the supply rail. It is intended for use in single supply xDSL systems where low distortion and low cost are essential. The amplifiers will be able to drive a minimum of 200 mA of output current.

The AD8541/AD8542/AD8544 are single, dual, and quad rail-to-rail input and output, single-supply amplifiers featuring very low supply current and 1 MHz bandwidth. They are guaranteed to operate from a 2.7 V single supply as well as a 5 V supply. These parts provide 1 MHz bandwidth at a low current consumption of 45 μA per amplifier.

AD8057/AD8058 is a low-cost, single- and dual-channel, high-performance voltage feedback amplifier with a 325 MHz bandwidth, 1000 V/μs slew rate, 0.1 dB gain flatness, 7 nV/√Hz noise, 5.4 mA/amplifier typical supply current @ 5 V, −85 dBc @ 5 MHz distortion, 3 V to 12 V wide supply range, and SOT-23 and SOIC packages.

The AD8010 is a low power, high current amplifier capable of delivering a minimum load drive of 175 mA. Signal performance such as 0.02% and 0.03° differential gain and phase error is maintained while driving eight 75 Ω back terminated video lines. The current feedback amplifier features gain flatness to 60 MHz and –3 dB (G = +1) signal bandwidth of 230 MHz and only requires a typical of 15.5 mA supply current from ±5 V supplies. These features make the AD8010 an ideal component for Video Distribution Amplifiers.

AD8012* is a dual 350 MHz low power amplifier with features such as low power consumption, high output current, high speed, and low distortion. It is widely used in applications such as XDSL and HDSL line drivers, ADC buffers, professional cameras, CCD imaging systems, ultrasound equipment, and digital cameras.

AD8051/AD8052/AD8054 are low-cost, high-speed, single-supply amplifiers with 110 MHz and 150 MHz -3 dB bandwidths, low distortion, and outstanding load drive capability

The AD825 is a low cost, general-purpose high speed JFET amplifier from Analog Devices. The AD825 features a high speed of 41 MHz, -3 dB bandwidth, 125 V/µs slew rate, and 80 ns settling time. The device has a 20 pA input bias current and 10 fA/√Hz noise current, as well as 12 nV/√Hz input voltage noise. The AD825 operates with ±5 V to ±15 V fully specified power supplies, and has a low distortion of -76 dB at 1 MHz. The device also has high output drive capability, can drive unlimited capacitance loads, and has an output current of 50 mA. The AD825 is available in an 8-lead SOIC package.

ADP1612/ADP1613 are 650 kHz /1.3 MHz Step-Up PWM DC-to-DC Switching Converters with features such as current limit, adjustable output voltage, adjustable soft start, etc. They are suitable for TFT LCD bias supplies, portable applications, and industrial/instrumentation equipment.

The AD8509/AD8511 are 9- and 11-channel, Muxed Input LCD Reference Buffers from Analog Devices. Their features include single-supply operation with a voltage range of 3.3 V to 6.5 V.

The AD8023 is a high current output drive, high voltage output drive, triple video amplifier. Each amplifier has 70 mA of output current and is optimized for driving large capacitive loads. The amplifiers are current feedback amplifiers and feature gain flatness of 0.1 dB to 10 MHz while offering differential gain and phase error of 0.06% and 0.02°. The AD8023 uses maximum gain bandwidth (3 dB) of 250 MHz, 1200 V/µs slew rate, 35 ns fast settling time (0.1%) and 30 ns fast disable function turn-off time. The AD8023 is suitable for LCD displays, video line drivers, broadcast and professional video, computer video plug-in boards and consumer video RGB amplifiers in component systems.

The OP281 and OP481 are dual and quad ultralow power single-supply amplifiers featuring rail-to-rail outputs. Each operates from supplies as low as 2.0 V and is specified at +3 V and +5 V single supplies as well as ±5 V dual supplies. Fabricated on Analog Devices’ CBCMOS process, the OP281/OP481 feature a precision bipolar input and an output that swings to within millivolts of the supplies, continuing to sink or source current up to

AD8005 is an ultralow power, high-speed amplifier. It features ultralow power consumption, high bandwidth, low distortion/noise, etc. It is suitable for signal conditioning, A/D buffering, power-sensitive high-speed systems, battery-powered equipment, communication or video test systems, portable medical instruments, etc.

The AD8009 is an ultrahigh speed current feedback amplifier with a phenomenal 5,500 V/µs slew rate that results in a rise time of 545 ps, making it ideal as a pulse amplifier. The high slew rate reduces the effect of slew rate limiting and results in the large signal bandwidth of 440 MHz required for high resolution video graphic systems. Signal quality is maintained over a wide bandwidth with worst-case distortion of –40 dBc @ 250 MHz (G = +10, 1 V p-p). For applications with multitone signals, such as IF signal chains, the third order intercept (3IP) of 12 dBm is achieved at the same frequency. This distortion performance coupled with the current feedback architecture make the AD8009 a flexible component for a gain stage amplifier.