ANALOG Manuals

AD9357 is a 2x2 MIMO RF transceiver operating in the 3.3GHz to 3.8GHz band with a bandwidth of 3.5MHz to 10MHz. The transceiver integrates 12-bit ADCs and DACs, offers superior receiver sensitivity and high linearity and spectral purity.

The ADF7901 is a low power OOK/FSK UHF transmitter designed for use in RF remote control devices. It is capable of frequency shift keying (FSK) modulation on eight different channels, selectable by three external control lines. OOK modulation is performed by modulating the PA control line.

The ADF7012 is a low power FSK/GFSK/OOK/GOOK/ASK UHF transmitter designed for short-range devices (SRDs). The output power, output channels, deviation frequency, and modulation type are programmable by using four, 32-bit registers.

ADF7902 is a low power UHF receiver IC that supports 2 kbps data rate and 34.8 kHz frequency deviation. It operates at 5V and consumes 18.5mA of current.

The ADF7020 is a high performance, ISM band, FSK/ASK transceiver IC operating in the frequency range of 431 MHz to 478 MHz and 862 MHz to 956 MHz.

ADF7025 is a high performance ISM band transceiver IC from Analog Devices. It works in the frequency range of 431MHz-464MHz, 862MHz-870MHz and 902MHz-928MHz. It supports data rates of 9.6kbps to 384kbps, FSK. The operating voltage is 2.3V-3.6V, and the output power can be programmed from -16dBm to +13dBm in 63 steps. The receiver sensitivity is -104.2dBm (38.4kbps), -100dBm (172.8kbps) and -95.8dBm (384kbps). The working current is 19mA (receive mode) and 28mA (transmit mode).

The ADF7022 is an io-homecontrol-compliant RF transceiver with features of low power, high performance, and low IF. It fully integrates the Layer 1, Layer 2, and time-critical elements of Layer 3 of the io-homecontrol protocol. It supports master, slave, and beacon modes, with automatic io-homecontrol channel scan, automatic CRC, preamble, start byte insertion/check, UART data encoding, and more. Additionally, it has features like low power modes, automatic address filtering, autonomous packet handling, etc., significantly increasing battery life.

ADF7021-V is a high performance, low power, narrow-band transceiver IC that integrates frequency synthesizer, filter, power amplifier, demodulator, coder, etc. The frequency range is 80MHz-960MHz, and the external VCO is used. The output power, IF filter bandwidth, modulation method, etc. can be configured.

This document describes the features and characteristics of the low power IEEE 802.15.4 zero-IF 2.4 GHz transceiver IC ADF7241, developed by Analog Devices.

ADF7023-J is a high performance, low power, ISM band FSK/GFSK/MSK/GMSK transceiver IC

The ADL5391 is an ultrafast symmetric multiplier from Analog Devices that operates from DC to 2.0 GHz.

The ADRF6602 is a high dynamic range RF mixer with integrated fractional-N PLL and VCO. It can be programmed via a 3-wire SPI interface.

This document is a user manual for a broadband up/downconverting mixer named ADRF6655. This mixer integrates a fractional-N PLL and VCO, and its frequency range is 100 MHz to 2500 MHz.

The ADRF6603 is a high dynamic range active mixer with integrated phase-locked loop (PLL) and voltage controlled oscillator (VCO). The PLL/synthesizer uses a fractional-N PLL to generate a fLO input to the mixer. The reference input can be divided or multiplied by a configurable integer multiplier. This allows the frequency range to be from 2100 MHz to 2600 MHz.

The ADRF6601 is a 750 MHz to 1160 MHz Rx mixer with integrated fractional-N PLL and VCO. It offers high dynamic range and low single sideband noise, making it suitable for applications such as cellular base stations.