ANALOG Manuals

The AD8671/AD8672/AD8674 are three high-precision, low-noise, low input bias current operational amplifiers. They feature extremely low noise, extremely low offset voltage and drift, low input bias current, 10 MHz bandwidth and low power consumption. Outputs are stable with capacitive loads of over 1000 pF. Supply current is less than 3 mA per amplifier at 30 V. The AD8671/AD8672/AD8674 combination provides outstanding linearity, wide bandwidth and low power consumption, making them ideal for many applications, such as PLL filters, GPS filters, instrumentation, sensors and controllers, and high-quality audio.

AD8029/AD8030/AD8040 is a low power, high speed, rail-to-rail input/output amplifier.

The AD8099 is an ultralow distortion, high-speed operational amplifier with a voltage noise of 0.95 nV/√Hz and a current noise of 2.6 pA/√Hz. It features ultralow distortion, with the second harmonic at -92 dB @ 10 MHz and the third harmonic at -105 dB @ 10 MHz. The op amp has a high speed with a gain bandwidth product (GBWP) of 3.8 GHz and a -3 dB bandwidth of 700 MHz (G = +2) and 550 MHz (G = +10). It has a slew rate of 475 V/µs (G = +2) and 1350 V/µs (G = +10). It has a new pinout and allows for custom external compensation with a gain range of -1, +2 to +10. It is suitable for applications such as pre-amplifiers, receivers, instrumentation, filters, A-to-D drivers, DAC buffers, and optical electronics.

AD8510/AD8512/AD8513 are JFET operational amplifiers with features such as high precision, low noise, low input bias current, and wide bandwidth.

The AD8603/AD8607/AD8609 are single/dual/quad micro- power rail-to-rail input and output amplifiers, respectively, that feature very low offset voltage as well as low input voltage and current noise. These amplifiers use a patented trimming technique that achieves superior precision without laser trimming. The parts are fully specified to operate from 1.8 V to 5.0 V single supply

This document describes the features and characteristics of the Precision Low Power Single-Supply JFET amplifiers AD8625/AD8626/AD8627, including low input bias current, single-supply/dual-supply operation, rail-to-rail output, low supply current, low offset voltage, unity gain stability, etc.

ADD8704 is a 16V single-supply quad operational amplifier that is drop-in replacement for EL5420. It is suitable for TFT LCD monitor panels, TFT LCD notebook panels, communications equipment, portable instrumentation and electronic games.

The AD8027/AD8028 are low distortion, high speed rail-to-rail input/output amplifiers. They feature high speed 190 MHz bandwidth, low distortion, low noise, low power consumption, etc.

AD8067 is a high-precision fast FET™ operational amplifier with low input bias current, high speed, low noise, low input capacitance, single power supply and rail-to-rail output. It is mainly used in photodiode preamplifiers, precision high gain amplifiers, high gain, high bandwidth composite amplifiers, etc.

AD8605/AD8606/AD8608 is a low noise, CMOS, rail-to-rail input/output operational amplifier with features such as low offset voltage, low input bias currents, low noise, wide bandwidth, high open-loop gain, etc. It is suitable for applications such as photodiode amplification, battery-powered instrumentation, multipole filters, sensors, barcode scanners, audio, etc.

The AD8065/AD8066 are high-performance, 145 MHz FastFET op amps with 1 pA input bias current, low cost, high speed, low noise, wide supply voltage range, single-supply and rail-to-rail output, low offset voltage, high common-mode rejection ratio, excellent distortion specifications, low power, and small packaging. They are qualified for automotive applications.

The AD8515 is a 1.8V low power CMOS rail-to-rail input/output operational amplifier. It features single supply operation from 1.8 to 5V, an offset voltage of 6 mV, an input bias current of 2 pA, rail-to-rail input and output swing, and a slew rate of 2.7 V/µs.

AD8038/AD8039 are low power, 350 MHz voltage feedback amplifiers with features such as low power consumption, high speed, and low noise.

AD8091/AD8092 are low-cost, high-speed rail-to-rail amplifiers with single-supply operation and output swings close to the power rails.

The AD8610/AD8620 are very high precision JFET input amplifiers with features such as low noise, low input bias current, and wide bandwidth.