Key facts
- Manuals
- 5
- Languages
- ZH · EN
- Last added
- 2026-10-17
Featured Skyrc manuals

SkyRC PC3000 4-Channel Intelligent Charger User Manual
The SkyRC PC3000 is a 4-channel intelligent charger designed for 12S or 14S lithium polymer batteries. It features fast and slow charging modes with a maximum output power of 2500W and includes protection functions such as short circuit, reverse polarity, and over-temperature protection. The device communicates with the battery to intelligently adjust charging current based on the battery's status. This manual is written in Chinese.
Covers: Features · Specifications · Operation Steps · Safety Warnings · Indicator Lights · Warranty

SkyRC NC1500 AA/AAA NiMH Battery Charger & Analyzer User Manual
The SkyRC NC1500 is a compact battery charger and analyzer designed for AA and AAA NiMH batteries. It features four independent slots, allowing simultaneous charging or testing of up to four batteries. The device supports three operation modes: charge, discharge, and refresh. It includes an LCD display to show real-time parameters such as voltage, current, capacity, and internal resistance. The charger is powered via USB and requires a 2.1A adapter. It offers adjustable current settings and includes safety features like temperature monitoring and trickle charging.
The manual provides step-by-step instructions for operating each mode, including selecting current levels, initiating processes, and monitoring battery status. It also includes safety warnings and warranty information, emphasizing proper usage and avoiding damage from misuse or environmental exposure.
Covers: Introduction · Operation Features · Charging Mode · Discharging Mode · Refresh Mode · Specifications

SKYRC 1/10 ESC User Manual
This manual guides users through installing, calibrating, and operating the SKYRC 1/10 ESC. It covers safety precautions, wiring, throttle/brake settings, and thermal management. Calibration is required for new transmitters or after changes. The ESC supports both sensor and sensorless brushless motors and can be programmed via PC, smartphone, or SKYLINK.
The ESC features turbo and boost timing adjustment, 10 user profiles, and safety protections including low voltage, overheat, and signal loss. It uses red copper connectors and laminated copper stack technology for reduced resistance and heat. Cooling is aided by an 8V 20000RPM fan and aluminum heat sinks. The ESC must be mounted in a ventilated area and never run without load at full throttle.
Covers: Safety Notes · Preparation · Mounting Speed Control · Soldering Instructions · ESC Calibration · ESC ON/OFF

SKYRC TS50 50A Sensored ESC Instruction Manual
This manual provides step-by-step instructions for installing, calibrating, and programming the SKYRC TS50 50A Sensored ESC. It includes safety precautions, wiring guidelines, and calibration procedures for throttle, brake, and neutral settings. The ESC supports 4-6S NiMH or 2S LiPo batteries and is designed for 1/10 scale buggy and touring cars.
The manual also details programming options via SKYRC’s program box or PC using SKYLINK software, including throttle curves, brake settings, and temperature protection. It warns against improper use, such as running without load or exposing the ESC to moisture, and includes warranty information and liability disclaimers.
Covers: Safety Precautions · Installation and Mounting · Wiring and Soldering · Calibration Procedure · Programming via Program Box or PC · ESC Operation and LED Indicators
Latest Skyrc manuals
SkyRC PC3000 4-Channel Intelligent Charger User Manual
User Manual 2 pages · 2 MB · ZHUser manual for the SkyRC PC3000 4-channel intelligent charger, covering operation, safety warnings, specifications, and warranty information.
SkyRC NC1500 AA/AAA NiMH Battery Charger & Analyzer User Manual
User Manual 2 pages · 627 KB · ENUser manual for SkyRC NC1500 charger with 4 slots, supporting AA/AAA NiMH batteries, max 1500mA charge rate, and features including charge, discharge, and…
SKYRC 1/10 ESC User Manual
User Manual 2 pages · 854 KB · ENUser manual for SKYRC 1/10 ESC with setup, calibration, safety, and connection instructions.
SKYRC TS50 50A Sensored ESC Instruction Manual
User Manual 2 pages · 863 KB · ENInstruction manual for SKYRC TS50 50A Sensored ESC, covering safety, installation, calibration, and programming for 1/10 scale brushless motors.
SkyRC TORO Micro 1/18 Scale Brushless ESC Instruction Manual
User Manual 2 pages · 839 KB · ENThis manual provides operating instructions, calibration procedures, and programming settings for the SkyRC TORO Micro 1/18 scale brushless ESC.
Which document do I need?
User Manual
Day-to-day operation, settings and troubleshooting. Start here if the product is already set up.
Questions answered in Skyrc manuals
What battery configurations does the PC3000 support?
The charger supports 12S or 14S lithium polymer batteries.
From: SkyRC PC3000 4-Channel Intelligent Charger User Manual
What are the charging modes available?
The device offers fast charge and slow charge modes.
From: SkyRC PC3000 4-Channel Intelligent Charger User Manual
What are the three operation modes of the NC1500?
The three operation modes are CHARGE, DISCHARGE, and REFRESH.
From: SkyRC NC1500 AA/AAA NiMH Battery Charger & Analyzer User Manual
What is the purpose of the REFRESH mode?
The REFRESH mode reduces memory effect and reactivates batteries that have been unused for a long time by charging, resting, discharging, and recharging.
From: SkyRC NC1500 AA/AAA NiMH Battery Charger & Analyzer User Manual
How do I calibrate the ESC?
Turn off the ESC, connect it to battery and motor, turn on transmitter, press and hold ESC switch for few seconds. Then set neutral, full throttle, and full brake positions by pressing switch while holding trigger in each position.
What does the LED indicator mean?
Red LED blinking = zero timing; Red LED on = motor boost and turbo timing on; Green LED blinking = calibration in progress; Green LED on = ESC ready.
