Key facts
- Brand
- Rikaline
- Model
- GPS-6010
- Documents
- 2
- Languages
- EN · ZH
- Last added
- 2011-10-19
Start here
Rikaline GPS-6010 User Manual
The GPS-6010 is a smart satellite receiver that supports up to 12 satellites, offers real‑time positioning, and can be used for automotive navigation, security systems, surveying and other applications. It includes RS‑232/TTL and USB interfaces, an internal rechargeable battery, and operates in a wide temperature range.
The manual contains a quick‑start guide, product introduction, technical specifications, operation features, hardware interface details, USB driver installation instructions, warranty terms, and a list of accessories and part numbers. This manual is written in Chinese.
Rikaline GPS-6010 specifications
| Size | 59.0(W) x 51.0 (47.3)(D) x 20.6(H) mm |
|---|---|
| Operating temperature | -40°C to +85°C (internal temperature) |
| Storage temperature | -55°C to +100°C |
| Input voltage | +4.75 ~ 5.5 VDC without accessories; +6 ~ 30 VDC with accessory A-6014 |
| Backup power | 3V rechargeable lithium cell battery, up to 1,000 hours (41.7 days) discharge |
| Satellites tracked | Up to 12 |
| Update rate | 1 second |
| Acquisition time | Reacquisition 0.1 sec.; hot start 8 sec.; warm start 38 sec.; cold start 45 sec. (averaged) |
| Position accuracy (non-DGPS) | 5-25 meter CEP without SA |
| Position accuracy (DGPS) | 1 to 5 meter, typical |
| Interface baud rates | 4800 (default), 9600, 19200, 38400 |
| NMEA output | NMEA 0183 Version 2.2 ASCII (GPGGA, GPGLL, GPGSA, GPGSV, GPRMC, GPVTG) |
| Dynamic altitude limit | 18,000 meters (60,000 feet) max |
All Rikaline GPS-6010 documents by type
Day-to-day operation, settings and troubleshooting. Start here if the product is already set up.
Questions answered in these manuals
How long does the GPS-6010 take to achieve a position fix?
Under normal circumstances it takes approximately 45 seconds to achieve a position fix, or 38 seconds if ephemeris data is known.
What are the default NMEA communication parameters?
The default communication parameters for NMEA output are 4800 baud, 8 data bits, stop bit, and no parity.