Key facts
- Model
- EC300 Series
- Category
- Other network devices
- Documents
- 2
- Languages
- EN
- Last added
- 2023-10-26
Start here

HMS Industrial Networks Netbiter EC300 Series Gateway User Manual
This user manual, SCM-1202-012 version 2.3, describes how to install and configure HMS Industrial Networks Netbiter EC300 Series gateways. It covers installation steps, factory reset, connectors, LED indicators, MODE button, wiring examples, local configuration, and technical data.
The document also includes local configuration details for USB, Ethernet, login, status, GPS, WAN/LAN network settings, modem settings for EC320/EC350/EC360, time settings, firmware update, logs, and system settings, plus an EtherNet/IP implementation appendix.
HMS Industrial Networks EC300 Series specifications
| Product name | Netbiter EC310, Netbiter EC320, EC350, Netbiter EC360 |
|---|---|
| Model name | NB301B, NB301A; NB302B is no-modem version |
| Ethernet interfaces | 10/100 Mbit/s, RJ45 connector |
| Relay output | Max. 24 V AC/DC, 1 A |
| Digital inputs | DI1, DI2: dry contact type |
| Analog inputs | AI1–AI4: 0 to 20 mA |
| PT100 support | AI1 and AI3: PT100, -50 to +150 °C (16-bit) |
| Serial port 1 | RS-232 up to 115.2 kbit/s |
| Serial port 2 | RS-485 up to 115.2 kbit/s |
| Supported protocols | Modbus-RTU, Modbus-TCP, EtherNet/IP, J1939, SNMP |
| Max. connected devices | 32 |
| Baud rates | 1200 to 115200 baud |
| Dimensions | 92 x 135 x 27 mm |
| Operating temperature | -40 to +65 °C |
| Storage temperature | -45 to +85 °C |
| Housing class | IP20 |
| Input voltage range | 9 to 32 VDC |
| Recommended power supply | 24 VDC, 25 W |
Source: HMS Industrial Networks Netbiter EC300 Series Gateway User Manual
All HMS Industrial Networks EC300 Series documents by type
Day-to-day operation, settings and troubleshooting. Start here if the product is already set up.
Questions answered in these manuals
What does this manual describe?
It describes how to install and configure Netbiter EC300 Series gateways.
From: HMS Industrial Networks Netbiter EC300 Series Gateway User Manual
How do I reset the unit to factory default settings?
Keep the MODE button pressed while powering on.
From: HMS Industrial Networks Netbiter EC300 Series Gateway User Manual
What is the recommended power supply voltage?
The recommended power supply is 24 VDC.
From: HMS Industrial Networks EC300 Series Gateway User Manual
Can the analog inputs support temperature sensors?
Yes, the analog inputs support PT100 temperature sensors on AI1 and AI3.
From: HMS Industrial Networks EC300 Series Gateway User Manual
