Key facts
Start here

Graco Magnum X5, X7, ProX9 Airless Sprayer User Manual
This manual provides instructions for the portable airless sprayers Magnum X5, X7, and ProX9, intended for architectural painting and coating applications. It covers essential safety warnings, including electrical grounding requirements and the prohibition of using flammable materials. The document details the identification of components for each model series and outlines the correct procedures for setup, operation, and cleaning. This manual is written in Spanish.
Read onlineGraco ProX9 specifications
| Dispense Rate (X5 Series A, B, C) | 0.24 gpm (0.91 lpm) |
|---|---|
| Dispense Rate (ProX7 Series A, B) | 0.34 gpm (1.29 lpm) |
| Hose Length (ProX9 Series A, B) | 1/4 in. X 50 ft (6.4 mm x 15 m) |
Source: Graco Magnum X5, X7, ProX7, ProX9 Airless Sprayers Repair and Parts Manual
All Graco ProX9 documents by type
Day-to-day operation, settings and troubleshooting. Start here if the product is already set up.
Disassembly, diagnostics and part numbers, for repair.
Questions answered in these manuals
What is the maximum operating pressure?
The system can produce a pressure of 3000 psi. Use parts capable of supporting a minimum nominal pressure of 3000 psi.
From: Graco Magnum X5, X7, ProX9 Airless Sprayer User Manual
Can I use this sprayer for flammable liquids?
No. This equipment is not designed for use with flammable or combustible materials in workshops or fixed locations.
From: Graco Magnum X5, X7, ProX9 Airless Sprayer User Manual
What materials should be used with X5 and X7 models?
Use water-based or mineral-spirit type materials only. Do not use materials with flash points lower than 70°F (21°C).
From: Graco Magnum X5, X7, ProX7, ProX9 Airless Sprayers Repair and Parts Manual
What is the minimum wire gauge for extension cords?
Use 12 AWG (2.5 mm²) minimum to carry the current the product draws.
From: Graco Magnum X5, X7, ProX7, ProX9 Airless Sprayers Repair and Parts Manual
