Key facts
Start here

Dell Vostro 270 Owner's Manual
This Spanish-language owner's manual for the Dell Vostro 270 covers safety precautions and procedures for shutting down, opening, and working inside the computer, plus steps to follow after service.
It also provides detailed removal and installation instructions for components such as the cover, expansion cards, system fan, memory, drives, wireless LAN card, card reader, power supply, power button, I/O panel, processor, coin-cell battery, and motherboard, along with system setup, diagnostics, troubleshooting, technical specifications, and contacting Dell. This manual is written in Spanish.
Dell Vostro 270 specifications
| Processor | Intel Core i3, Core i5, Pentium Dual-Core, Celeron |
|---|---|
| Memory connectors | Two DIMM slots |
| Memory capacity | 2 GB, 4 GB, 6 GB or 8 GB |
| Memory type | 1333 MHz and 1600 MHz DDR3 (non-ECC) |
| Maximum memory | 8 GB |
| Chipset | Intel B75 |
| BIOS chip | 64 Mb |
| Power supply | 300 W |
| Input voltage | 100 VAC to 127 VAC or 200 VAC to 240 VAC |
| Height | 366.00 mm (14.41 in) |
| Width | 175.00 mm (6.89 in) |
| Depth | 434.00 mm (17.09 in) |
All Dell Vostro 270 documents by type
Day-to-day operation, settings and troubleshooting. Start here if the product is already set up.
Disassembly, diagnostics and part numbers, for repair.
Questions answered in these manuals
What is the regulatory model of the Dell Vostro 270?
The regulatory model is D11M and the regulatory type is D11M002.
What is the maximum memory supported?
The computer supports a maximum of 8 GB of memory.
What tools are recommended for component procedures?
A small flat-blade screwdriver, a Phillips screwdriver, and a plastic scribe.
How should I shut down the computer before service?
Shut down the operating system, then make sure the computer and connected devices are off.
What tools are required for component removal and installation?
The procedures may require a small flat-blade screwdriver, a Phillips screwdriver, and a small plastic scribe.
How do I ground myself before working inside the computer?
Ground yourself by using a wrist grounding strap or by periodically touching an unpainted metal surface, such as a connector on the back of the computer.
