Key facts
Start here

Crane FKX 9000 Three-Eccentric Butterfly Valve Installation and Maintenance Manual
This manual provides step‑by‑step instructions for installing the Crane FKX 9000 three‑eccentric butterfly valve, including proper handling, flange connections, welding guidelines and torque settings. Safety precautions, pressure testing procedures and recommended transport and storage practices are also covered.
Operational guidance covers manual and powered actuator use, normal operating cycles, periodic inspection, and detailed fault diagnosis with repair recommendations. Material specifications, dimensions and optional design options are listed in the later sections. This manual is written in Chinese.
Crane FKX 9000 specifications
| Valve Body Material | Carbon steel A216 Gr. WCB or stainless steel A351 Gr. CF8M |
|---|---|
| Size Range (DN) | DN 80‑350 (3"‑14") and DN 400‑1600 (16"‑64") |
| Pressure Test – Open Position | ≤ 1.5 × PS |
| Pressure Test – Closed Position | ≤ 1.1 × PS |
Source: Crane FKX 9000 Three-Eccentric Butterfly Valve Installation and Maintenance Manual
All Crane FKX 9000 documents by type
Day-to-day operation, settings and troubleshooting. Start here if the product is already set up.
Questions answered in these manuals
How should the pressure test be performed on the valve when it is open?
When the valve is open, the test pressure must not exceed 1.5 times the rated pressure PS.
From: Crane FKX 9000 Three-Eccentric Butterfly Valve Installation and Maintenance Manual
What materials are used for the valve body?
The valve body is made of carbon steel A216 Gr. WCB or stainless steel A351 Gr. CF8M.
From: Crane FKX 9000 Three-Eccentric Butterfly Valve Installation and Maintenance Manual
