User manual for the Zhongchuang Zhihe ZH-4041-3 network three-phase electrical parameter collector: models, specs, wiring and Modbus registers.
This is the user manual (使用说明书) for the Zhongchuang Zhihe ZH-4041-3 network three-phase electrical parameter collector, a three-phase isolated measuring instrument that can also measure three single-phase circuits. It uses a 24-bit AD chip, measures true RMS values of phase and line voltage, current, frequency, active and reactive power, power factor, harmonic power and accumulated energy, and communicates over RS485 or Ethernet RJ45 (or Wifi) using Modbus-RTU or Modbus-TCP.
The document covers the product overview and feature list, the model numbering (ZH-4041-34N1, ZH-4041A-34N1, ZH-4041-35N1, ZH-4041A-35N1, ZH-4041-39N1, ZH-4041A-39N1, plus a -6 Wifi suffix), performance specifications, outline and pin definitions, wiring diagrams for three-phase four-wire, three-phase three-wire (two-meter and three-meter) and single-phase use, and the Modbus-RTU and Modbus-TCP message formats with register definitions. This manual is written in Chinese.
| 输入接线方式 | 三相四线/三相三线(或三个单相回路) |
|---|---|
| 精度等级 | 电压电流 0.2%;功率综合优于 0.5% |
| 电流量程 | 10mA, 100mA, 1A, 5A, 10A, 30A, 50A, 100A AC (above 5A uses through-hole type, 7.5mm) |
| 电压量程 | 10V, 100V, 250V, 400V, 500V AC |
| 电压输入阻抗 | 2KΩ/V |
| 频率响应 | 30Hz-1.2KHz |
| 工作温度 | -20℃ to +60℃ |
| 隔离耐压 | >2500VDC |
| 辅助电源 | +10V~+30VDC or +10V~+55VDC or 85~265VAC |
| 额定功耗 | <2W |
| 通讯波特率 | 4800, 9600, 19200, 38400, 57600, 115200bps |
| 数据更新时间 | 20ms, 40ms, 60ms, 80ms, 100ms (default), 400ms, 1000ms |
Address 1, baud rate 9600, no parity, 8 data bits and 1 stop bit.
The factory IP is 192.168.2.7 and the port number is 20108; the web login user name and password are both admin.
Modbus-RTU or Modbus-TCP can be selected; the factory default protocol is Modbus-RTU and switching to Modbus-TCP requires a protocol setting per register 0060H.
The module measurement mode must be set to the three-phase three-wire mode in register 0056H (86).
A 400ms sampling time should be used for better stability.