Zenit Blue-BluePRO Electric Pump User and Maintenance Manual

User and maintenance manual for Zenit Blue-BluePRO submersible electric pumps, covering safety, installation, electrical connections and maintenance.


Zenit Blue-BluePRO Electric Pump User and Maintenance Manual - cover page
Brand
Zenit
Category
AC Submersible Pump Motors
Document type
User Manual
Language
English
Pages
14
File format
PDF
File size
1.1 MB
Published
17 November, 2026
Updated
17 November, 2026
MD5 checksum
969CC5138EED135C706A186749553900

About this manual

This is the English user and maintenance manual for the Zenit Blue-BluePRO electric pumps. It is a translation of the original instructions and begins with a safety section covering installation by skilled staff, electric connections, grounding, protection of the intake and outlet, and the personal protective equipment to be worn when handling the pump in a tank.

The manual then describes conditions of use for the Blue-BluePRO pump range, noise level, handling and lifting, installation methods (mobile post, fixed post, joining foot with guide pipes), electrical connections and rotation-direction check for three-phase models, the floating switch, residual risks and maintenance. Pump data must be recorded on a self-adhesive label supplied with the manual.

What's inside

  • Safety
  • Electric connections
  • Introduction
  • Conditions of use
  • Noise level
  • Handling
  • Installation
  • Electrical connections
  • Floating switch
  • Residual risks

Specifications

Maximum immersion depth20 m beneath the fluid level
Temperature of fluid treatedmaximum 40 °C, or 60 °C with discontinuous operation
Density of fluid treatedmaximum 1.1 kg/dm³
pH of fluid to be pumpedbetween 6 and 14
Start-ups per hourmaximum of 20 evenly spaced start-ups
Acoustic pressure levelbelow 70 dB(A) immersed, below 80 dB(A) in air
Recommended shaft sizeno smaller than 500 mm x 500 mm x 500 mm
Solid passage (DGBlue model)up to 50 mm

Frequently asked questions

How deep can the Zenit Blue-BluePRO pump be immersed?

The immersion depth is a maximum of 20 m beneath the fluid level.

What is the maximum temperature of the fluid being pumped?

The fluid temperature must not exceed 40 °C, or 60 °C with discontinuous operation.

How many start-ups per hour are allowed?

A maximum of 20 evenly spaced start-ups per hour is allowed.

What pH range can the pump handle?

The pH of the fluid to be pumped must be between 6 and 14.

Download PDF (1.1 MB)

More Zenit Manuals


View all Zenit manuals →