User manual for the Yida Electronics SY-993 marine engine order telegraph: installation, wiring, front panel operation, communication protocol and…
This operation manual covers the SY-993 marine engine order telegraph from Linhai Yida Electronics (亿达电子). It describes the installation method, operating method and precautions, external wiring connections, the front panel controls and indications, the communication protocol, installation dimensions and simple fault diagnosis and treatment.
The front panel section explains the 11 gears, serial data transmission between the bridge telegraph and the engine room reply telegraph, the indicating lights and audible alarm, the no-power alarm with automatic switching from AC24V main power to DC24V, the misoperation alarm, the emergency (fault) button, dimming and mute. The manual also gives an RS485 NMEA0183 message format at 4800 bps and a VDR interface for connecting a telegraph recorder. This manual is written in Chinese.
| Gears | 11 gears: ahead full, ahead half, ahead slow, ahead dead slow, standby, stop, fwe, astern dead slow, astern slow, astern half, astern full |
|---|---|
| Main power / backup | Main power AC24V; automatically switches to DC24V when main power fails |
| Communication | RS485 using NMEA0183 protocol, 4800 bps, 1 start bit, 8 data bits, 1 stop bit, 1 parity bit |
| VDR interface | Complies with NMEA0183 standard; can connect a telegraph recorder |
| Alarm interface | Normally open; closed (short circuit) when an alarm occurs |
It has eleven gears: ahead full, ahead half, ahead slow, ahead dead slow, standby, stop, fwe, astern dead slow, astern slow, astern half and astern full.
It uses RS485 communication with the NMEA0183 protocol at a baud rate of 4800 bps, with 1 start bit, 8 data bits, 1 stop bit and 1 parity bit.
Check whether the cable core is damaged or whether the two devices are connected correctly.
The device automatically turns to DC24V and the corresponding LED flashes as an alarm; the alarm is revoked when the main power supply returns to normal.