Chinese user manual for the Yichuan Ted smart electronic scale, covering its external interfaces, usage instructions, daily maintenance and calibration…
This is the Chinese user manual (电子秤使用说明书) issued by Guangzhou Yichuan Information Technology Co., Ltd. (广州一川信息科技有限公司) for its Ted smart electronic scale. The 7-page document, revised on 2016-01-25 as version 1.0, describes the scale's external interfaces, how to use the scale correctly, daily maintenance rules and the calibration procedure.
The interface section lists two RS232 serial ports (COM1 for direct PC communication, COM2 for devices such as serial barcode scanners, relays, PLCs and printers), a VGA-style GPIO port with six inputs and six outputs, a standard RJ45 Ethernet port, two USB host ports for mice, keyboards, USB drives and USB barcode scanners, and a 9-12 V DC wide-voltage power input. The usage and maintenance sections cover placement on a level surface, warm-up before weighing, battery charging every six months, protection from water and heat, and a four-step calibration routine using a standard test weight. This manual is written in Chinese.
| Serial ports | 2 x RS232 (COM1, COM2) |
|---|---|
| GPIO port | VGA-style connector, 6 inputs / 6 outputs |
| Ethernet | Standard RJ45, 100 Mbit |
| USB | 2 x USB host |
| Power input | 9-12 V DC wide-voltage input |
Place it on a level, stable surface with no paper or other material under the body; tilting or shaking affects the readings.
If the scale is not used for a long time, charge it continuously for 12 hours every six months to prevent damage from battery self-discharge.
Empty the platform, tap "进入标定", place a calibration standard weighing at least two thirds of the max range, enter its weight, range, decimal point and division, then tap finish.
No. The scale must never be exposed to rain or rinsed with water, and water must never enter the interior.