VISSONIC VIS-GSK-F Flush Mount Gooseneck Microphone Base Instruction Manual

VISSONIC VIS-GSK-F flush mount gooseneck microphone base instruction manual covering installation, system connections, audio interface and technical parameters.


VISSONIC VIS-GSK-F Flush Mount Gooseneck Microphone Base Instruction Manual - cover page
Brand
vissonic
Category
Other Electronics
Document type
User Manual
Language
English
Pages
17
File format
PDF
File size
1.2 MB
Published
16 November, 2026
Updated
16 November, 2026
MD5 checksum
56445531066FB1C24881344B1AC4FF9E

About this manual

This instruction manual (version 1.0, released 2020.6.29) describes the VISSONIC VIS-GSK-F flush mount gooseneck microphone base. The base is a built-in microphone socket for inconspicuous desktop installation that connects to the full range of VIS-M 6-pin gooseneck microphones, which can be removed when not in use. It has an optional capacitive sensing touch button with an LED status light ring, a built-in RF filter, and is supplied with a shockproof rubber isolation ring and metal fixing ring to reduce vibration noise.

The manual gives product description and layout, open hole and product dimensions, application solutions for a full digital network conference system with the VIS-AIB multifunctional connection box and VIS-DCP2000-D processor, and use with the VIS-FS100-A feedback suppressor or VIS-DSP8 sound processor. It also lists technical parameters, pin assignments of the audio interface, safety and installation notes, and ordering information for related microphones and equipment.

What's inside

  • Product description and layout
  • Open hole dimension
  • Full digital network conference system application
  • System Component
  • Connection
  • Multifunctional connection box
  • Work with VIS-FS100-A feedback suppressor or VIS-DSP8 sound processor
  • Microphone connection
  • Technical indicators
  • Audio interface

Specifications

Output impedance360 Ω
Control signal when pressedHigh potential (DC +5V); low potential (DC 0V) when not pressed
LED indicatorHigh potential (DC +5V) red; low potential (DC 0V) white
Phantom powerDC 24-48V
Power consumption4 mA typical
Switch typeLight touch control type, instantaneous type
Weight165 g
SizeLength 128.2 mm, maximum width 55.3 mm
Microphone body diameter22 mm
Touch button diameter15 mm

Frequently asked questions

Which microphones can be used with the VIS-GSK-F microphone base?

It has a built-in microphone socket for the full range of VIS-M 6-pin gooseneck microphones. The microphone can be removed when it is not in use.

What phantom power does the microphone base need?

The base operates with a 24-48V phantom power supply.

What output connectors does the base have?

It outputs through a 3-pin XLR male connector or a 3.5 Phoenix connector.

How is the gooseneck microphone held in the base?

After inserting the microphone in place, a nut on the microphone locks it, and the microphone can only be removed after the user releases it manually.

Download PDF (1.2 MB)