Vipp 526 and 528 pendant lamp specifications and installation guide, covering materials, light sources, dimensions, mounting options and bulb replacement.
Vipp makes the 526 and 528 pendant lamps. The document gives product specifications for both models, including indoor use, powder-coated aluminium, stainless steel and glass materials, black finish, weights, 6 m cord length, voltage options, E27/E26 and E14/E12 light sources, energy efficiency and IP class. It notes that dimming is possible only with a retrofit dimmable LED bulb and a suitable dimmer.
Installation instructions cover mounting directly over an electrical outlet or next to one, using a drilling template or rosette, routing and cutting the power cord, and connecting the ground wire in the US. A bulb-change section describes switching off power, loosening the finger screw, removing the glass diffuser, changing the bulb and re-mounting the diffuser.
| Environment | Indoor use only |
|---|---|
| Materials | Powder-coated aluminium, stainless steel, glass |
| Colour | Black |
| Weight (526) | 3.5 kg / 7.7 lbs |
| Weight (528) | 1.4 kg / 3 lbs |
| Cord length | 6 m / 236 in |
| Voltage | 220-240V~ 50/60Hz or 120V~ 60Hz |
| Light source (526) | E27 MAX 60 Watt or E26 MAX 75 Watt |
| Light source (528) | E14 MAX 15 Watt or E12 MAX 12 Watt |
| Energy efficiency | A++ - E |
| IP class | 20 / dry locations only |
| Dimming | Possible with retrofit |
Yes. The specifications state it is for indoor use only.
It uses an E27 MAX 60 Watt or E26 MAX 75 Watt bulb; the light source is regionally dependent.
It is not dimmable from the factory, but dimming is possible if the lamp is retrofitted with a dimmable LED bulb and a suitable dimmer.
Switch off the power supply first, then loosen the finger screw on the lamp shade while holding the glass diffuser, remove the diffuser, change the bulb, re-mount the diffuser and tighten the screw.