Instruction manual for VERTYS PROTHESIS EXCEL, a pressure-curing self-curing resin with composite microspheres for removable partial dentures.
VERTYS PROTHESIS EXCEL is a pressure-curing, self-curing resin based on methyl methacrylate with composite microspheres. It is intended for removable partial denture applications and is also recommended for relining and repairing dentures. The manual covers model preparation, isolation, mixing, dosing, injection, polymerization, storage, safety, and available packages.
The resin is supplied as liquid and powder in several sizes and shades. It is free of tertiary amines and cadmium, and the document states that it has stable coloring, simple use, and high mechanical and physical properties. This manual is written in Spanish.
| Mixing ratio | 20 g powder and 8-10 g liquid for a medium-sized denture |
|---|---|
| Mixing time | 15 seconds until a homogeneous mixture |
| Injection time | Approximately 1 minute |
| Polymerization | Thermal press or pressure pot for 30-40 minutes at 2 bar and 45-55°C |
| Reference temperature for times | 20-23°C |
| Post-curing recommendation | Leave the model in water for 24 hours at 35-38°C |
| Urgent polymerization | 15 minutes instead of 30 minutes, keeping pressure at 2-4 bar and cooking temperature at 45°C |
| Storage temperature | Not above 25°C |
| Liquid package sizes | 500 ml, 1000 ml, 50 ml |
| Powder package sizes | 1000 g and 100 g |
It is a pressure-curing self-curing resin with composite microspheres intended for removable partial denture applications. It is also recommended for denture relining and repairs.
For a medium-sized denture, mix 20 g of powder with 8-10 g of liquid. Too much liquid can cause greater shrinkage.
Mix for 15 seconds until homogeneous, allow 10 seconds of rest, then pour into the syringe and inject. Injection takes approximately 1 minute.
Use a thermal press or pressure pot for 30-40 minutes at 2 bar and 45-55°C. In urgent cases, polymerization can be done in 15 minutes while keeping pressure at 2-4 bar and temperature at 45°C.