Verope Special Wire Ropes User Manual

Verope Special Wire Ropes User Manual covers selection, use, maintenance, storage and safety for special wire ropes in lifting applications.


Verope Special Wire Ropes User Manual - cover page
Brand
Verope
Category
Other products
Document type
User Manual
Language
Chinese
Pages
31
File format
PDF
File size
54.6 MB
Published
17 November, 2026
Updated
17 November, 2026
MD5 checksum
5B2653D715624FF8AD327122E65EE2C2

About this manual

This user manual from verope® AG covers verope® special wire ropes, which are multi-strand wire ropes intended for general lifting and hoisting applications. The document states conformity with Machinery Directive 2006/42/EC and references EN 12385 parts 1–4 for wire ropes and EN 13411 parts 1–8 for wire ropes and end connections.

It provides operating instructions for unloading, transport and storage, unreeling and re-reeling, cutting, end fittings, re-lubrication, inspection and installation of the ropes, including on cranes. Users must follow the crane manufacturer's standards, observe the maximum safe working load, and consult verope® AG if there is any doubt about the rope's capability. This manual is written in Chinese.

What's inside

  • Unloading, transport and storage of wire ropes
  • Correct wire rope storage
  • Unreeling and re-reeling
  • Cutting wire rope
  • Wire rope ends and end fittings
  • Re-lubrication of wire ropes
  • Correct inspection of wire ropes
  • Installation specifications
  • Break-in of new special wire ropes
  • Mobile crane installation specifications

Specifications

Pre-tensioning forceAt least 2.5%-5% of minimum breaking force (MBL)
Re-lubrication frequency10 times during service life
Lubricant typesWax-based and oil-based grease
Aerosol grease rope diameter10 mm to 30 mm

Frequently asked questions

Which directive does the manual comply with?

It complies with Machinery Directive 2006/42/EC.

How many times should the wire rope be re-lubricated during its service life?

Re-lubrication is recommended 10 times during the service life.

What pre-tensioning force should be applied when installing the wire rope?

Apply at least 2.5%-5% of the minimum breaking force (MBL).

What should be done if there is doubt about verope®'s capability?

Consult verope® AG.

Download PDF (54.6 MB)