Uniview V1.0 terminal video recorder host quick start guide covering packing list, interfaces, installation, startup, and web login.
This quick start guide is for the Uniview V1.0 outdoor intelligent-traffic terminal video recorder host, which combines video management, data management, iSCSI storage, audio/video decoding, image processing, and network switching.
It covers the packing list, indicator lights, interfaces and buttons, hard-disk and device installation, pre-power checks, startup, and web login settings such as default IP addresses, account, and browser requirements. This manual is written in Chinese.
| Power input | DC 12 V, 10 A |
|---|---|
| Hard disk capacity | Up to 4 recommended 3.5-inch hard disks |
| Alarm inputs | 8 channels, dry contact input, Phoenix terminal |
| Alarm outputs | 4 channels, relay output, Phoenix terminal |
| Audio | 2 analog audio inputs and 2 analog audio outputs, Phoenix terminal |
| RS485 ports | 2 RS485 standard ports, Phoenix terminal |
| USB ports | 2 USB ports |
| 12 V output | DC 12 V, 500 mA for external devices, Phoenix terminal |
| Default IP (SFP0/GE0) | 192.168.2.30 |
| Default IP (SFP/GE) | 192.168.1.30 |
| Default username | admin |
| Default password | 123456 |
SFP0 and GE0 default to 192.168.2.30, while SFP and GE default to 192.168.1.30.
The default username is admin and the default password is 123456.
Press and hold the RST button for more than 5 seconds, then release it.
Internet Explorer 9 or later is required.