Uninwell BQ-6880E Conductive Silver Adhesive Datasheet

Technical data sheet for Uninwell BQ-6880E two-part epoxy silver adhesive: properties, 1:1 mix ratio, curing, packaging and handling notes.


Uninwell BQ-6880E Conductive Silver Adhesive Datasheet - cover page
Brand
Uninwell
Category
electronic components
Document type
Datasheet
Language
Chinese
Pages
2
File format
PDF
File size
148 KB
Published
17 November, 2026
Updated
17 November, 2026
MD5 checksum
2426F11237BB820BA447947AF49D9A46

About this manual

Uninwell BQ-6880E is a two-part epoxy conductive silver adhesive that uses silver powder as its medium. The document states that it offers high purity, high conductivity and low modulus with a long working life, and is intended for conductive bonding of temperature-sensitive parts. Listed advantages are low viscosity for good dispersion, fast curing at room temperature, a very low amount of volatile substances and good adhesion to metals and plastics. Uses named in the text include small and medium electronic components that need conductivity or EMI control, silver-plated holders and printed circuit board substrates, flexible substrates such as FPC, EMI encapsulation and filling, EMI shielding materials, circuit repair, electrode lead-out, jumper and wire bonding, ITO bonding, RF component bonding and mounting of samples on an electron microscope stage.

The two-page document gives typical property tables for Part A and Part B, the mixing and curing process, properties after curing, packaging in 20G, 50G, 200G and 500G dispensing syringes, preparation and handling instructions, and precautions. It notes that the data are typical values measured at 25 °C and 70% humidity for reference only, that Uninwell and Breakover-quick are registered trademarks of Uninwell International, and that users should read the material safety data before using the product. This manual is written in Chinese.

What's inside

  • Product Introduction
  • Materials and Properties
  • General Properties
  • Application Process
  • Properties After Curing
  • Packaging and Specifications
  • Instructions for Use
  • Precautions

Specifications

Mix ratio (A:B)1:1 by weight
Working time1.5 hours at 25 °C
Curing time4 hours at 25 °C
Appearance (Part A / Part B)Silver-white viscous paste
ViscosityPaste at 25 °C
Shelf life in storage24 months at ≤0 °C
Glass transition temperature95 °C (DSC)
Coefficient of thermal expansion below Tg54 ppm/°C (TMA)
Coefficient of thermal expansion above Tg178 ppm/°C (TMA)
Thermal conductivity2.6 W/M·°C
Volume resistivity0.000013 (IEC)
Shear tensile strength>1000 psi (25 °C/2 h)
Pencil hardness3-4 H
Thermal weight loss0.02% at 200 °C
PackagingDispensing syringes of 20G, 50G, 200G and 500G

Frequently asked questions

What is the mixing ratio of Uninwell BQ-6880E?

Part A and Part B are mixed at a 1:1 ratio by weight. The document recommends stirring thoroughly for no less than 20 minutes.

How long is the working time and curing time?

At 25 °C the working time is 1.5 hours and the curing time is 4 hours.

How should the conductive silver adhesive be stored?

Stored sealed below 0 °C it has a shelf life of 24 months; below 25 °C the shelf life is 12 months.

What package sizes are available?

It is supplied in dispensing syringes of 20G, 50G, 200G and 500G.

Download PDF (148 KB)