Owner's manual for TurboChef HhC 1618, 2020 and 2620 high h conveyor ovens: specifications, installation, cleaning, operation and troubleshooting.
This is the owner's manual for the TurboChef high h conveyor ovens 1618, 2020 and 2620. It begins with safety information on reducing fire risk, preventing oven damage, grounding instructions and power cord replacement, then lists dimensions and electrical specifications for each of the three models, followed by packaging, certifications, construction and installation instructions covering delivery and initial inspection, lifting, oven location and placement, installation near an open heat source and ventilation requirements.
The manual continues with daily and weekly cleaning instructions and standard oven operation: oven controls, cooking, editing a cooking profile, changing a profile name, and adjusting belt speed, temperature and top and bottom air. Oven modes, setup and config screens, firmware updates, troubleshooting, replaceable parts and the North America and international limited warranties close the document. Support contact numbers 800.90TURBO and +1 214.379.6000 are given.
| HhC 1618 exterior height | 13.0" (330 mm); 17.0" (432 mm) with legs |
|---|---|
| HhC 1618 exterior width | 36.0" (914 mm) |
| HhC 1618 exterior depth | 31.7" (805 mm) |
| HhC 1618 conveyor length | 36.0" (914 mm) or 48" (1219 mm) |
| HhC 1618 electrical, North America | 1 phase, 208/240 VAC, 50/60 Hz, 37 amp current draw, max input 7.5 kW |
| HhC 1618 electrical, Europe/Asia (380-415 VAC) | 3 phase, 12 amp current draw, max input 7.5 kW, 5-wire supply |
| HhC 2020 exterior width | 48.3" (1227 mm) |
| HhC 2020 exterior depth | 35.7" (907 mm) |
| HhC 2020 electrical, North America | 3 phase, 208/240 VAC, 50/60 Hz, 40 amp current draw, max input 14.4 kW |
| HhC 2020 electrical, Europe/Asia (380-415 VAC) | 3 phase, 20 amp current draw, max input 14.4 kW, 5-wire supply |
Turn off the oven, then disconnect the power cord or shut off power at the fuse/circuit breaker panel.
The manual states that the oven should be cleaned only with TurboChef Oven Cleaner.
No. If the power supply cord is too short, have a qualified electrician or serviceman install an outlet near the appliance.
The manual instructs to clean the oven daily, with additional weekly cleaning instructions provided.