TTK FG-SYS F wall-mounted digital unit detects and locates conductive liquid leaks and cable breaks, with setup, testing and maintenance instructions.
The FG-SYS Digital system from TTK detects and locates conductive liquid leaks (water, acids and bases) in industrial applications and buildings. It uses sense cables FG-EC/FG-ECS for water and bases and FG-AC/FG-ACS for acids; it is not compatible with hydrocarbon FG-OD sense cables and probes. A leak starts an audible alarm and a luminous alert, and the LCD screen shows the fault with the location of the initial leak point to the nearest meter. The system also detects and locates a cable break on the circuit.
The digital unit is available in a wall-mounted version, FG-SYS F, in a metal enclosure measuring 200 mm wide, 250 mm high and 100 mm deep. A thirteen-button keypad is used to name detection zones, configure relays and serial communication, and set system parameters. One unit manages three circuits of sense cables, each with a maximum of 40 sense cables of 15 meters, or 600 meters per circuit. It has eight configurable dry contacts, two independent RS232/RS485 serial links with JBUS/MODBUS protocol for connection to a supervisor, and keeps the last thirty defects in memory. The guide covers installation and electrical connection, sense cable and accessory installation, startup, test procedures, maintenance and troubleshooting.
| Power supply | 100-240 VAC, 0.35-0.2 A, 50/60 Hz |
|---|---|
| Maximum consumption | 15 W |
| Enclosure dimensions | 200 mm wide x 250 mm high x 100 mm deep |
| Sense cable circuits | Three circuits, max. 40 sense cables of 15 m or 600 m per circuit |
| Dry contacts | Eight configurable dry contacts |
| Relay switching rating | Max. 125 VAC / 60 VDC, 1 A, 62.5 VA / 30 W |
| Sense cable circuit voltage | 12 VDC |
| Serial communication | Two independent RS232/RS485 links, JBUS/MODBUS protocol |
| Fault memory | Last thirty defects |
| Keyboard | Thirteen buttons |
It detects conductive liquid leaks such as water, acids and bases in industrial applications and buildings.
No. The FG-SYS Digital Unit is not compatible with hydrocarbon FG-OD sense cables and probes.
Each circuit has a maximum capacity of 40 sense cables of 15 meters, or 600 meters maximum per circuit.
Through two independent RS232/RS485 serial links using the JBUS/MODBUS communication protocol.