Trenz Electronic TE0300 XPS Reference Designs Application Note

Application note for Trenz Electronic TE0300 XPS reference designs, covering DMA, MPMC4, OPB designs, custom IP cores, build steps, and porting.


Trenz Electronic TE0300 XPS Reference Designs Application Note - cover page
Brand
Trenz Electronic
Category
Board
Document type
Application Note
Language
English
Pages
6
File format
PDF
File size
518 KB
Published
16 November, 2026
Updated
16 November, 2026
MD5 checksum
58EF49189B361305CE5B658CA2928001

About this manual

This application note describes TE0300 XPS reference designs built with Xilinx EDK version 10.1.03, including DMA, MPMC4, and OPB reference designs. It introduces three custom IP cores, xps_vfbc_dma_v1_00_a, xps_fx2_v1_00_a, and xps_i2c_slave_v1_00_a, and explains their roles in memory access and FPGA-host communication.

It also provides build and download steps using Xilinx Platform Studio and XMD, UART terminal settings, and porting instructions for different TE0300 module versions, FPGA devices, oscillator frequencies, memory controllers, and UART clock settings. Table 1 lists TE0300 assembly versions with kilo gates, clock frequency, and DDR SDRAM memory.

What's inside

  • Introduction
  • Building the project
  • To run the demo application
  • Porting to different modules
  • To change FPGA device
  • To change oscillator frequency
  • Revision History
  • Table 1: TE0300 assembly versions

Specifications

Xilinx EDK version10.1.03
Reference designsDMA, MPMC4, OPB
Custom IP coresxps_vfbc_dma_v1_00_a, xps_fx2_v1_00_a, xps_i2c_slave_v1_00_a
xps_fx2_v1_00_a FIFOstwo 2 kB FIFOs
xps_i2c_slave_v1_00_a registers6 x 32-bit memory mapped registers
RS232 baud rate115200 baud
RS232 stop bits1
RS232 parityNo parity
XMD UART port number4321
Supplied design oscillator125 MHz
Supplied design FPGASpartan-3E XC3S1200E-4FG320
DDR SDRAM memory optionsQimonda HYB25DC512160CF-6 and Micron MT46V32M16BN-6:F
Porting example FPGASpartan-3E xc3s1200e (or xc3s1600e)/fg320/-4

Frequently asked questions

What Xilinx EDK version do the TE0300 reference designs use?

They are built using Xilinx EDK version 10.1.03.

What is the RS232 baud rate?

The RS232 baud rate is 115200 baud.

Which TE0300 module version is the supplied reference design built for?

TE0300-01, which uses a 125 MHz oscillator and a Spartan-3E XC3S1200E-4FG320 FPGA.

How do you switch from the hw_test application to the demo application in XMD?

Uncomment line 3, comment line 2, save xmd.ini, type exit in the XMD command window, then restart XMD.

Download PDF (518 KB)

More Trenz Electronic Manuals


View all Trenz Electronic manuals →