Transtar Euro Classic DTM Primer technical data sheet: mix ratios, suitable substrates, surface prep, spray gun setup, dry times and product specifications.
This Transtar Autobody Technologies technical data sheet covers Euro Classic DTM Primer in the 7341, 7344, 7361, 7364, 7371 and 7374 versions, supplied in gallon, quart and 1/2 pint sizes in gray, white and black. It gives the mix ratios for use as a primer surfacer (4:1) and as a sealer or rollable primer (4:1:1 with activator 7354/7357 and Urethane Grade Reducer 6700 or 6700-F Series), the 3 hour pot life, and the list of suitable substrates from bare steel and galvanized to aluminum, fiberglass/SMC gel coat and OEM E-Coat.
The sheet also sets out surface preparation and application steps — cleaning with SCAT products, sanding grits by substrate, coat counts and flash times — plus tinting with the Star Shade system, gun setup and air pressure, dry and recoat times, physical specifications, VOC regulatory data, limitations and the limited warranty. Transtar states the product is for use only by professional, trained painters.
| Pot life | 3 hrs at 77°F (25°C) and 50% R.H. |
|---|---|
| Mix ratio (primer surfacer) | 4:1 — 4 parts primer to 1 part activator |
| Mix ratio (sealer / rollable primer) | 4:1:1 — primer, activator and reducer |
| Shelf life | 3 years |
| Approximate coverage (4:1) | 708 ft2/gal @ 1 mil |
| Approximate coverage (4:1:1) | 590 ft2/gal @ 1 mil |
| RTS solids by weight (4:1) | 66% |
| RTS solids by weight (4:1:1) | 57% |
| Weight per gallon | 12.49 #/gal |
| Film build | 1.5-2.0 mils per coat dry film; do not exceed 6 mils total |
| Flash time between coats | 5-10 min |
| Dry to sand | 1-6 hrs |
| Force drying | 30 min @ 140°F (60°C) |
| Colors | 7341/7344 gray, 7361/7364 white, 7371/7374 black |
As a primer surfacer it is mixed 4 parts primer to 1 part activator 7354/7357; as a sealer or rollable primer, 4 parts primer, 1 part activator and 1 part Urethane Grade Reducer (6700 or 6700-F Series).
The pot life is 3 hours at 77°F (25°C) and 50% R.H.
Bare steel, bare galvanized, bare aluminum, self-etching, 1K and 2K primer, fiberglass/SMC gel coat, body filler, OEM E-Coat, rigid raw plastic (SMC, BMC) and OEM finish or old paint work.
The primer must be shaken for a minimum of 10 minutes.