TP-Link TL-WPA8631P KIT powerline extender quick installation guide covering setup, pairing, Wi-Fi copying, management, and troubleshooting.
This Quick Installation Guide for the TP-Link TL-WPA8631P KIT explains how to set up the TL-WPA8631P extender with the TL-PA8010P adapter. It describes connecting the adapter to a router LAN port, plugging the extender into a wall outlet on the same electrical circuit, and using the default SSIDs and password on the label.
The guide also covers pairing powerline devices, copying Wi-Fi settings from a router with the Wi-Fi button or OneMesh, managing devices with the tpPLC app, tpPLC Utility, or tplinkplc.net, resetting the extender, and answers to common questions. Safety information is included.
| Wi-Fi bands | 2.4 GHz and 5 GHz |
|---|---|
| Integrated electrical socket | Pass-through AC outlet |
| Web interface address | http://tplinkplc.net |
With the extender plugged into an electrical outlet, press and hold the Reset button until all LEDs turn off. When the LEDs turn back on, the reset process is complete.
Make sure all powerline adapters and extenders are on the same electrical circuit and that their Powerline LEDs are lit. Also check that all devices are securely connected and test internet by connecting a computer directly to the modem or router.
Press the Pair button on the adapter for 1 second, then within 2 minutes press the extender’s Pair button for 1 second. The network is created when the extender’s Powerline LED turns on.
Use the tpPLC app on a smartphone or tablet, the tpPLC Utility on a computer, or connect wirelessly and visit http://tplinkplc.net.