This guide provides quick installation steps for TP‑LINK PoE•AC integrated gigabit router modules (TL‑R488GPM‑AC, TL‑R498GPM‑AC, TL‑R499GPM‑AC).
The guide walks you through connecting the router module, powering it, and configuring network settings using either the TP‑LINK mobile app or a PC browser. It includes instructions for linking TP‑LINK APs, setting up WAN/LAN ports, and verifying indicator LEDs.
Additional sections cover common troubleshooting questions, warranty information, technical specifications, and cloud management via the TP‑LINK commercial cloud app. This manual is written in Chinese.
| PoE Standard | IEEE 802.3af/at |
|---|---|
| Power Supply Voltage/Current | 53.5VDC/1.22A |
| Dimensions | 225mm x 74mm x 24mm |
| Operating Temperature | 0℃~40℃ |
| Operating Humidity | 10%~90% RH (non‑condensing) |
| Storage Temperature | -40℃~70℃ |
| Storage Humidity | 5%~90% RH (non‑condensing) |
Ensure the computer obtains an IP address automatically, connect to the router's LAN ports, check IE network settings, try a different browser or cable, and if needed reset the router to factory defaults.
Press and hold the Reset button on the rear panel until all indicator LEDs light up, then release the button.
The module supports the IEEE 802.3af/at PoE standard.