The Toro 53453 Low-Pressure Tap Timer Installation Guide covers battery setup, watering programming, and troubleshooting for the battery-powered garden hose…
The Toro 53453 Low-Pressure Tap Timer is a battery-powered tap timer for home, garden hose, and drip irrigation systems. It connects to a 3/4" hose bib or Y ball valve and uses a ball valve mechanism for reliable watering control.
The guide includes installation steps, safety guidelines, frequency and run time programming, the delay start function, and troubleshooting for issues such as leaks and low battery power.
| Inlet thread | 3/4" FHT (female hose thread) |
|---|---|
| Outlet thread | 3/4" MHT (male hose thread) |
| Power supply | Two AA alkaline batteries |
| Max operating pressure | 125 PSI |
| Min operating pressure | 5 PSI |
| Max water temperature | 100°F (38°C) |
| Time delay | Up to 12 hours per day |
Unscrew the battery cover, insert two AA alkaline batteries, replace the cover, and fasten the screws.
Push the Delay Start button until the indicator turns red, then push once for each hour of delay, up to 12 hours.
Make sure the faucet tap is on, the Run Time knob is not at OFF, and the battery power is good.
Do not use water exceeding 100°F (38°C).