Thrustmaster TWCS Throttle user manual covering specifications, PC setup, button and axis mapping, TFRP rudder installation, friction adjustment, and…
Thrustmaster TWCS Throttle is a PC throttle with 8 axes, 14 action buttons, a mini-stick with push-button, a rocker switch, a friction adjustment screw, a TFRP rudder connector, and a USB connector. It supports TFRP rudder pedals, whose three axes connect directly to the throttle.
Setup uses a PC driver and a Windows Control Panel interface, with properties for testing functions and an optional center dead zone for the mini-stick. The manual also covers button and axis mapping, TFRP rudder installation and automatic axis calibration, friction adjustment, T.A.R.G.E.T software, troubleshooting, warranty, and technical support.
| Throttle axis | 1 |
|---|---|
| Antenna axis | 1 |
| Mini-stick with push-button axes | 1 |
| Rocker switch axes | 1 |
| Action buttons | 14 |
| TFRP rudder connector | 1 |
| Friction adjustment screw | 1 |
| USB connector | 1 |
| Axes | 8 total, 3 for TFRP rudder pedals |
Go to https://support.thrustmaster.com/, select Joysticks / TWCS Throttle, then Drivers, and download and install the PC driver and its custom Windows Control Panel-based interface.
Connect the rudder pedals' RJ12 male connector to the RJ12 female connector at the back of the TWCS Throttle, then connect the TWCS Throttle's USB connector to a PC USB port.
Push the throttle axis to maximum, turn the unit over, turn the screw clockwise to increase friction or counter-clockwise to reduce it; do not over-tighten or loosen it completely.
Turn off the PC, unplug and reconnect the USB connector, turn on the computer, restart the game, and leave the rudder axis centered when connecting.