TENTA MEX-X2 class X2 metallized polypropylene AC line capacitor specification: 275 V AC rating, 0.001–2.2 µF range, tolerances and test data.
The TENTA MEX-X2 is a main interference suppression capacitor of class X2, made with metallized polypropylene film and intended for across-the-line, antenna-coupling and line-by-pass use and for radio and electromagnetic interference filters. The specification gives reference standards (VDE EN 60384-14, ENEC IEC 60384-14, UL60384-14, KC K60384-14, CQC GBIT14472-1998), a rated voltage of 275 V AC 50/60 Hz, a capacitance range of 0.001 µF to 2.2 µF and tolerances of ±5% (J), ±10% (K) and ±20% (M).
The document also lists the electrical and mechanical test data: dissipation factor below 0.1% at 1 kHz and 20 °C, insulation resistance, withstand voltage of 1183 V DC for 60 s or 2000 V DC for 1 s, climate category DIN40040 GMF with a -40 °C to +100 °C range, plus humidity, life, solderability, vibration and electrode tensile tests. The final pages give normal and compact size tables with dimensions (W, H, T, P and lead diameter), outline drawings and an explanation of the marking printed on the case, together with the VDE, ENEC, KC, CQC and UL approval file numbers.
| Reference Standards | VDE EN 60384-14, ENEC IEC 60384-14, KC K60384-14, UL60384-14, GBIT14472-1998 |
|---|---|
| Rated Voltage | 275 V AC, 50/60 Hz |
| Capacitance Range | 0.001 µF to 2.2 µF |
| Capacitance Tolerance | ±5% (J), ±10% (K), ±20% (M) |
| Dielectric | Metallized polypropylene film |
| Dissipation Factor | Less than 0.1% at 1 kHz and 20 °C |
| Insulation Resistance | ≥15000 MΩ for capacitance ≤0.33 µF; ≥5000 s/µF above 0.33 µF, measured at 100 VDC after 60 s at 20 °C |
| Withstand Voltage | 1183 V DC for 60 s, or 2000 V DC for 1 s |
| Climate Category | DIN40040 GMF; -40 °C minimum, +100 °C maximum limit temperature |
| Approvals | VDE, ENEC, KC, CQC, UL (file numbers listed) |
| Solderability Test | Solder bath 260±5 °C, Sn/Cu 99.3%/0.7%, 3±0.5 s |
It is rated 275 V AC at 50/60 Hz, for use as an across-the-line capacitor.
The capacitance range is 0.001 µF to 2.2 µF, with tolerances of ±5% (J), ±10% (K) and ±20% (M).
It is approved by VDE, ENEC, KC, CQC and UL, and the document lists the file number for each.
The capacitor is tested at 1183 V DC for 60 seconds, or at 2000 V DC for 1 second.